Vertex Standard VXR-7000 Operating Manual page 13

Clk Sft: Enable/disable the CPU Clock Shift
This function is only used to move a spurious response
"birdie" should it fall on a current frequency.
Double-click the left mouse button to toggle "yes" or
"no."
NSQ Mode: Noise Squelch Mode
This command selects the manner of setting of the
Squelch threshold level.
User = The squelch threshold level is fixed via the
"NSQ Lv" parameter (NSQ Lv: 0 [min.] ~
255 [max.]).
Prpgm = The squelch threshold level determined via
the dealer programming.
Double-click the left mouse button to select the desired
NSQ Mode.
NSQ Lv: Noise Squelch threshould level
Use the [ 0 ] - [ 9 ] keys to enter the desired Squelch thresh-
old level directly, and press the [ E
values are 0 (min.) ~ 255 (max.).
VXR-7000 FM R
EPEATER
CE27 Programming Software Instruction
Channel Data Items
] key. Available
NTER
CE27 Main Screen (Left)
O M
PERATING ANUAL
Court Blip: Courtesy Blip
Double-click the left mouse button to toggle "on" or
"off."
When this parameter is set to "on," this function causes
the VXR-7000 to send out a "blip" on the portable/mo-
bile radio is frequency each time the portable radio is
unkeyed. This provides audible confirmation to the user
that the VXR-7000 was able to receive the transmission
from the portable.
Rev Bst: Reverse Burst.
Double-click the left mouse button to toggle "on" or
"off."
When this parameter is set to "on," the CTCSS tone
signal's phase is inverted just before the repeater turns
to receive. This allows the portable/mobile station's
CTCSS Decoder to begin switching off, thus reducing
the transition time required.
DCS Typ: DCS Format
This command is effective only when DCS is chosen for
squelch control.
A = "Normal" DCS
B = "Inverted" (complement) DCS
Double-click the left mouse button to select the desired
DCS Type.
11