Epic Fitness A32e Elliptical Manual page 10

8. Tip: Avoid pinching the Main Wire
Harness (110).
Slide the Upright (4) onto the Frame (1). Attach
the Upright with seven M8 x 16mm Screws (72);
do not fully tighten the Screws yet.
Do not press the Shield Cover (75) into
place yet.
9. Identify the Right Pedal (49) and the Right Pedal
Arm (58) and orient them as shown.
Attach the Right Pedal (49) to the Right Pedal
Plate (139) on the Right Pedal Arm (58) with
four M6 x 14mm Screws (121) and four M6
Washers (90).
Attach the Left Pedal (14) to the Left Pedal
Arm (44) in the same way.
8
75
72
72
1
9
14
139
90
90
121
121
10
62
110
Avoid pinching
the Main Wire
Harness (110)
4
72
44
49
58