Bowflex Xtreme Assembly And Owner's Manual page 8

6
Step 5 Install Squat Pulley Frame
Parts:
• Squat Pulley Frame Assembly
• Main Assembly
Hardware:
• 1 Button Head Screw (3/8" X 5")
• 1 Nylock Nut (3/8")
• 2 Button Head Screws (3/8" X 1")
• 4 Washers (3/8")
Tools:
7/32" Hex Wrench & Adjustable
or Socket Wrench
5-1
Place the Squat Pulley Frame behind the Seat
Support Rail and align the top screw holes.
Secure using a 3/8" X 5" screw, washer and
nut in the top hole as shown.
5-2
Install screws and washers into the bottom
holes of the Squat Pulley Frame as shown.
Step 6 Install Pulley
Arms
Parts:
• Right Pulley Arm
• Left Pulley Arm
• Main Assembly
Hardware:
• 4 Washers (3/8")
• 4 Button Head Screws
(3/8" X 3/4")
Tools:
7/32" Hex Wrench
6-1
Slide Left and Right Pulley Arms
onto the connectors on the base
frame as shown.
6-2
Secure Pulley Arms to Base Frame
using screws and washers as shown.
Do not tighten screws
at this time.
Assembly Guide
Squat Pulley
Frame
Flat
Washers
Button
Head
Screw
Nylock
Nut