Getting Started - Bowflex VersaTrainer Owner's Manual

CArE OF ThE VersaTrainer
The VersaTrainer ® design uses very few moving parts,
therefore the machine needs minimal maintenance. The
following are some areas you will want to check and
maintain to keep your VersaTrainer
good working condition.
1 - Pulleys: The pulleys may develop some noise or
squeaks with use. If noise occurs simply spray
some silicon or other lubricant on the pulley.
This should eliminate any noise.
2 - rod Caps: The rod caps are attached to the rods with
screws. Check screws periodically and
tighten as needed.
rods: The Power Rod
3 - Power rod
®
4 - general: Before using your VersaTrainer
fasteners to be sure none has loosened with
use. Tighten as needed.
Prolonged direct exposure to sunlight will cause the Power Rod
Bowflex® VersaTrainer® Owner's Manual

getting started

®
® exercise machine in
rods should
®
always be bundled together
when not in use. Binding the
Power Rod pack together
®
extends the life of the rods
(see Figure -1).
® check all
C A U T I O N
Figure 3-1
rods to deteriorate.
®
11