Table of Contents
Advertisement
F - 160 Operation and Maintenance Manual
k) Place the level across the top of the upper main
roll in the center. Refer to Figure 4.6.4
Figure 4.6.4 Left to right
Level
l) Level the machine from left to right.
m) Verify your adjustments when finished.
n) Press GAP
to 1 in. setting.
G A P
1
© GBC Pro - Tech August 1999
Plane4
Plane4
P R E S S U R E
o) Remove the level.
p) Lower the front safety shield.
q) Turn MAIN POWER to "OFF ".
4.7 Safety check
The safety check will ensure that all safety
devices and interlock switches are functioning properly.
Do not wear ties, loose fitting clothing or
dangling jewelry while operating or
servicing the laminator. These items can get
caught in the nip and choke you or you can
be crushed or burned.
If you find a safety feature not working
properly, you should contact your local
service representative immediately
Installation
WARNING
WARNING
Page 4 - 11
Advertisement
Table of Contents
