Table of Contents
Advertisement
F - 160 Operation and Maintenance Manual
Section 1 Safety
Do not attempt to operate your Falcon 160
laminator until you have read this section
carefully!
Your safety, as well as the safety of others, is
important to GBC Pro - Tech. This section contains
important safety information.
The following symbols are used throughout this
manual to indicate Information, Caution, Warning,
Danger and Electrical Shock conditions.
1.1 Symbols
INFORMATION
Indicates helpful information that should be
considered before, during, or after an
action, step or procedure is given.
Indicates a potentially hazardous situation
which, if not avoided, could result in minor
or moderate injury, or alerts against unsafe
practices or alerts against actions which
could damage the product.
© GBC Pro - Tech August 1999
CAUTION
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, could result in serious
injury.
Indicates an imminently hazardous situation
which, if not avoided, could result in death
or serious injury.
Indicates an electrical shock situation which,
if not avoided, could result in serious
paralyzation of the body or death.
1.2 Safety features
The F-160 laminator has been designed with
safety as a primary consideration; however, you
must become thoroughly familiar with the controls,
proper operation, proper service procedures and safety
features of the laminator before using or servicing the
unit.
Safety
WARNING
DANGER
ELECTRICAL
S H O C K
Page 1 - 1
Advertisement
Table of Contents
