Table of Contents
Advertisement
GBC 3064WF
CONTROL GUIDE
1
8
9
7
Figure 5
© 2005 General Binding Corporation
A. Power ON/OFF (I/O):
Located at the back left of the machine applies power to the
laminator. The control panel display will illuminate when
position marked "I" is pushed. The Off position, marked "O"
removes power from the laminator.
2
B. Control Panel (Figure 5)
1. Main Roll Nip Pressure relevant pressure in percentage:
a
2. Top Roll Display
• Displays Temperature in "
(Both Set Temperature and Current Temperature)
3
• LED Marked "
• LED Marked "
o
in "
F"
• LED Marked "Ready" illuminates when set temperature is
4
reached.
{a}. Control Switches:
b
⌃ - When Pressed Increases the Temperature
- When Pressed Decreases the Temperature
MEAS- Press and Hold to Display Current Top Roller
5
Temperature
3. Main Switch (TOP Heater):
Position turns On the top heater, when pressed to the
Position turns Off the top heater.
6
4. Bottom Roll Display
• Displays Temperature in "
(Both set Temperature and Current Temperature when
MEAS switch is pressed)
• LED Marked "
1
• LED Marked "°F" if Illuminated indicates Temperature reading
o
in "
F"
• LED Marked "Ready" illuminates when set temperature is
reached.
MEAS- Press and Hold to Display Current Bottom Roller
Temperature
{b}. Control Switches
∧
- When Pressed Increases the Temperature
∨
- When Pressed Decreases the Temperature
MEAS-Press and Hold to Display Current Bottom Roller
Temperature
5. Main Switch (Bottom Heater):
position turns On the bottom heater, when pressed to the
position turns Off the bottom heater.
6. Fan Switch:
7. Laminator Main Control Switch:
laminator between "RUN"
8. Machine Power On Light:
Machine On.
9. Laminator Direction Motion Control Switch: Controls the
forward and rearward movement of the laminator.
10. Laminator Speed Control:
Regulates the speed of laminator feed.
• Outer Scale in Feet/Minute.
Operation Manual
o
o
C "or "
F" of the Top Heater
o
C" if Illuminated indicates reading in "
o
F" if Illuminated indicates Temperature reading
When pressed to the
o
o
C" or "
F" of the Bottom Heater
o
C" if Illuminated indicates reading in "
When pressed to the
Switches cooling fan ON
/ OFF
Switches the
and "STOP"
modes.
Green light illuminated –
o
C "
o
C"
Page 7
Hide quick links:
Advertisement
Table of Contents
