Remote control functions
The LCD remote control buttons are used to send commands to the sys-
tem. The descriptions below reflect the standard configuration for this
system. The buttons can be custom configured for the user's specific
needs by the installer.
2- way and 1- way
Press and release
Press and release
Press and release
Mode™ or press and hold for approximately two seconds to
activate optional auxiliary function such as trunk release.
The auxiliary output controls____________________
Press and hold
Press and release
auxiliary convenience or expansion option.
The auxiliary output controls____________________
© 2012 Directed. All rights reserved.
to lock the doors and arm the vehicle.
to unlock the doors and disarm the vehicle.
then press
for two seconds, to activate Panic.
and
or
to activate Silent
simultaneously to an activate
7