Disarming Without A Transmitter; Dome Light Control - Viper 3305V Owner's Manual

ond timer is provided for your convenience, in case you accidentally
trigger the system.

Disarming without a transmitter

This feature allows you to disarm the security sys tem without the remote
trans mit ter should it be lost, dam aged, or disabled. In order to dis arm
the system with out a remote transmitter, you must have the ve hi cle's
ig ni tion key and know where the Valet button is located. Be sure to
check with the installer for the location and the number of presses of
the Valet button required to disarm the system.
To disarm the security system:
1. Turn the ignition to the ON position.
2. Press and release the Valet button the preset number of times
(one, the factory setting, to five times) within 15 seconds.
After five seconds the sys tem disarms. If the system does not dis-
arm, you may have waited too long.
Turn the ignition off and on and try again.
Location of Valet Button _________________________________
Number of Pulses
The unit may respond to one to five pulses of the Valet button, when
disarming. Check with your installer to discuss how you want the
system configured.
Note: as a precaution, if programmed for passive arming the system
should be placed into Valet Mode until a remote is available.

Dome light control

16
_________________________________
© 2012 Directed. All rights reserved.