Wireless Network Name (Ssid) Setup; Wireless Security - ZyXEL Communications NBG2105 User Manual

Chapter 4 Router Setup Wizard
The following table describes the labels in this screen.
Table 11 WAN Access Type: PPPoE
LABEL
WAN Access Type
User Name
Password
Cancel
Back
Next

4.4 Wireless Network Name (SSID) Setup

Name your wireless network by entering an SSID. Click Next to proceed with the Wireless
Security Mode screen.
Figure 16 Wireless Network Name (SSID)
The following table describes the labels in this screen.
Table 12 Wireless Network Name (SSID)
LABEL
Wireless
Network Name
(SSID)
Cancel
Back
Next

4.5 Wireless Security

Configure the wireless security settings on your NBG2105 in the following screen. The fields that
show up depend on the kind of security you select.
36
DESCRIPTION
Select PPPoE to make the NBG2105 get its IP configuration via PPPoE.
Enter the user name provided by your ISP.
Enter the password provided by your ISP.
Click this to cancel the wizard.
Click this to go back to the previous step in the wizard.
Click this to go to the next step in the wizard.
DESCRIPTION
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN.
If you change this field on the NBG2105, make sure all wireless stations use the same SSID
in order to access the network.
Click this to cancel the wizard.
Click this to go back to the previous step in the wizard.
Click this to go to the next step in the wizard.
NBG2105 User's Guide