Chapter 13 Wireless LAN
13.6 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to Wireless LAN >
Site Survey to open the following screen. This screen is available only when the NBG2105 is in
WISP+UR or Client mode.
Figure 55 Wireless LAN > Site Survey
The following table describes the labels in this screen.
Table 44 Wireless LAN > Site Survey
LABEL
Wireless Network
Name (SSID)
Channel
Site Survey
SSID
BSSID
Channel
Type
92
DESCRIPTION
Enter the SSID of the AP to which you want the NBG2105 in WISP+UR mode or client
mode to connect.
Enter the channel number used by the wireless device to which the NBG2105 is
connecting.
Click this to search for available wireless devices within transmission range and update
this table.
This shows the SSID of the wireless device.
This shows the MAC address of the wireless device.
This shows the channel number and wireless standard used by this wireless device.
This shows the type of device found in the survey.
NBG2105 User's Guide