Set Up A Wireless Network Using Wps - ZyXEL Communications LTE2566-M634 User Manual

If the wireless client keeps trying to connect to or acquiring an IP address from the LTE2566-M634, make
8
sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the LTE2566-
M634.
If your connection is successful, open your Internet browser and enter
of any other web site in the address bar. If you are able to access the web site, your wireless connection
is successfully configured.

4.4 Set Up a Wireless Network Using WPS

This section gives you an example of how to set up wireless network using WPS. This example uses the
LTE2566-M634 as the AP and a WPS-enabled Android smartphone as the wireless client.
The Push Button Configuration (PBC) is a WPS method for creating a secure connection. PBC creates a
secure wireless network simply by pressing a button.
Follow these steps to successfully connect your WPS compatible device with the LTE2566-M634.
Make sure that your LTE2566-M634 is turned on. Make sure the wireless LAN is turned on, and that the
1
LTE2566-M634 is placed within range of the device you want to connect.
Press the WPS button for 1 second on the LTE2566-M634's side panel.
2
Go to your phone settings and turn on WiFi. Open the WiFi networks list and tap WPS Push Button or the
3
WPS icon (
Note: It does not matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The LTE2566-M634 sends the proper configuration settings to the wireless client. This may take up to two
minutes. Then the wireless client is able to communicate with the LTE2566-M634 securely.
The following figure shows you an example to set up wireless network and security by pressing a button
on both LTE2566-M634 and wireless client (the Android smartphone in this example).
Chapter 4 Tutorials
).
LTE2566-M634 User's Guide
37
http://www.zyxel.com or the URL