Chapter 3 Operation Modes
Figure 4 Router Mode Application
3.3.1 Setting Router Mode
Select Router mode if your device routes traffic between a local network and another network such
as the Internet. To set Router mode:
Make sure the power LED is on (not blinking).
1
Slide the Operation Mode Switch to Router. See
2
The NBG2105 restarts after you slide the Operation Mode Switch.
3
3.3.2 Navigation Panel
Use the sub-menus on the navigation panel to configure NBG2105 features.
22
Section 1.8 on page
16.
NBG2105 User's Guide