Remote Jack Pack / Tv Connections & Setup - LG Pro Centric 32LP645H Commercial Mode Setup Manual

Reference: Remote Jack Pack / TV Connections & Setup
Remote Jack Pack Setup
RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093
RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE
to 1). See Installer Menu detailed descriptions for further information.
093 RJP AVAILABLE
TV Connections
Make these connections ONLY after Master TV Setup and TV cloning procedures are
complete.
Refer to the figure below, and connect the RJ-45 Control cable from the RJP cable bundle to the RJP
INTERFACE port on the TV's rear jack panel. Then, connect HDMI, RGB, and Composite Video/Audio
connectors, as applicable, for the cable bundle.
HDMI/DVI IN 1
Connect HDMI connector
from RJP cable bundle.
RJP
Connect RJ-45
Control cable from
RJP cable bundle.
54
001
RESET UPDATE
PTC SERVICE
GAME CONTROL
(SERVICE ONLY)
/MPI
RJP
/DVI IN
..........
..........
1
2
SPEAKER OUT OPTICAL
LINE OUT AUDIO OUT
AV IN
RGB IN (PC)
RS-232C IN
TV-LINK
AUDIO IN (RGB/DVI)
(SERVICE ONLY)
CFG
RGB IN (PC)
Connect RGB connector from RJP
cable bundle (legacy RJP only).
AUDIO/VIDEO IN
Connect Composite Video/
Audio connectors from RJP
cable bundle. (Composite
Video on legacy RJP only.)
ANTENNA/
CABLE IN
206-4232