Learning / Teaching A Master Tv Setup Using A Usb Memory Device / .Tll File - LG Pro Centric 32LP645H Commercial Mode Setup Manual

Lodging guest interactive pro:centric tvs
Hide thumbs Also See for Pro Centric 32LP645H:
Table of Contents

Advertisement

Learning / Teaching a Master TV Setup using a USB Memory Device / .tll File

USB Cloning Notes
• Read the IMPORTANT CLONING INFORMATION on page 34 before beginning
any cloning procedures.
• You may edit the filename as part of the Learning procedure; however, a file
with edited contents will not be recognized.
• It is not possible to clone a Master TV's clock using a USB memory device.
Either set a Target TV's clock manually, or use the Auto Clock setting in the TV
setup menus.
Learn Setup from Master TV
1. Ensure the Master TV is set up completely and in Pass-through Mode.
2. Insert the USB memory device into the USB IN port on the Master TV.
3. Press MENU SETTINGS on the Installer Remote to display the TV setup
menus. Use the arrow navigation keys to select/highlight the Option menu
icon, and then press the number "7" key a total of seven times to display the
USB Download Menu.
4. To gain access to the "Learn From TV" option in the USB Download Menu, key
in the password used to access the Installer Menu (Example: Press 9-8-7-6).
5. Use the Up/Down arrow keys to select Learn From TV (TLL), and then
press OK.
6. To differentiate this .tll file from others, you can use the Up/Down arrow keys
to change the last five digits of the filename. Press OK when you are ready
to initiate Learning.
Learning status will be shown on a progress bar in a new window. When the
Learning process is complete, the USB Download Menu will reappear on the
screen.
7. When Learning is done, press
Download Menu, and remove the USB memory device from the Master TV.
206-4232
on the Installer Remote to exit the USB
USB Cloning Procedures (Cont.)
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Learn From TV (TLL)
Learn From TV (TLX)
Previous
Learn From TV (TLL)
Select the file name and press OK to start
xxLP645H-UA00001.TLL
Previous
Learn From TV
UPDATING...
Do not remove the USB from the port!
Do not unplug!
OK
OK
25%
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents