Commercial Mode Overview; Setup Checklist; Pass-Through Mode - LG Pro Centric 32LP645H Commercial Mode Setup Manual

Commercial Mode Overview

This document describes how to set up LP645H Pro:Centric
commercial TV functionality is based on "ownership" of the Channel Map; that is, the Channel Map resides
in the TV's CPU, Protocol Translator Card (PTC), or embedded b-LAN™ (EBL) module, or it resides
externally from the TV (i.e., in a device from the solution provider).
These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively, the
EBL module can be configured either for Pass-through Mode (default) or FTG Mode. When neither the CPU
nor EBL is in FTG Mode, these TV models also allow external control via the TV's MPI port.

Setup Checklist

Note: This document provides information specific to Commercial Mode operation. Refer to the Quick
Reference Guide for information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric or FTG Mode via CPU operation and/
or create a Master TV Setup for cloning purposes for TVs that are to remain in Pass-through Mode. This
mode also allows external control via the GAME CONTROL/MPI port on the TV rear jack panel.
There are two methods for configuring individual TVs that are currently in Pass-through Mode: either
using the EZ-Manager Wizard or the Custom Master TV Setup procedure as described in this document.
EZ-Manager Wizard
The EZ-Manager Wizard provides automated or manual options for configuring essential items for
Pro:Centric operation and also provides an option for using a USB memory device to configure the TV.
Use the Installer Remote to make selections and complete each step. See "EZ-Manager Wizard" on pages
11 to 17 for detailed information.
Custom Master TV Setup
The Custom Master TV Setup procedure enables you to create a customized Master TV Setup for cloning
purposes. Use the Installer Remote to configure Installer Menu items as required for TV operation and
set up TV features (Channel, Picture, Audio, etc.). See "Custom Master TV Setup" on pages 29 to 32 for
detailed information.
6
®
TVs for Commercial Mode operation. LG
Cable Connections
__ Make all rear jack panel and MPI card slot
connections, as appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.
206-4232