Custom Master Tv Setup Procedure; Installer Seq - LG Pro Centric 32LP645H Commercial Mode Setup Manual

Custom Master TV Setup (Cont.)

Custom Master TV Setup Procedure

1. Turn ON the TV.
If the EZ-Manager Wizard appears on the screen when you turn ON the TV, use the arrow
keys on the Installer Remote to select Exit from the Welcome screen and press OK. In the
confirmation pop-up window, select OK, and then press OK once more on the Installer
Remote to exit the wizard.
2. Set Installer Menu items.
This step provides specific instruction only on the Installer Menu items
that should be set on a Master TV. Refer to pages 20 to 28 for detailed
information on all Installer Menu items.
a) Use the Installer Remote to access the PTC Installer Menu (see
"Accessing the Installer Menu" on page 20 for further information).
The next step depends on whether the EZ-Manager Wizard
appeared when you turned ON the TV:
• If the wizard did appear, the TV is in a factory default state, and
you can proceed to set Installer Menu items. Go to step (c).
• If the wizard did not appear, go to step (b).
b) Set Installer Menu item 117 FACT DEFAULT to 1 and press OK on
the Installer Remote.
This clears all Installer Menu custom settings, channel lineup, etc.
and restores the factory default settings. The value will change
back to 0 after the PTC has been restored to factory default
condition. This step ensures that the TV Channel Memory will be
the active channel lineup.
c) Set Installer Menu item 003 BAND/AFC, as appropriate.
• Broadcast: Set to 0.
• CATV: Set to 1 (default).
d) Set any other Installer Menu items that affect your TV programming
network to the required configuration. For example, enable/disable
Aux inputs, set a Start Channel, etc.
e) After you have adjusted all Installer Menu item settings as required,
press OK once on the Installer Remote to save your changes; then,
press OK again to exit the menu.
3. Set up TV features.
On-screen setup menus control the features of the TV. Press MENU
SETTINGS on the Installer Remote to access the TV setup menus,
and then set Channel, Picture, Audio, Time, etc. options to the
desired configurations. See "Clonable TV Setup Menu Features" list
on previous page and also notes on the following page.
30
• HRC: Set to 2.
• IRC: Set to 3.
xxLP645H PTC INSTALLER MENU
CPU-CTV

000 INSTALLER SEQ

000
UPN 000-000-000-000
PTC V1.00.022 CPU V3.35.00
Typical Installer Menu
Note: The Installer Menu header will vary
depending on the TV you are setting up.
117 FACT DEFAULT
003 BAND/AFC
Adjust the values for these
Installer Menu items, as required.
PICTURE AUDIO CHANNEL
LOCK OPTION INPUT
Use the TV setup menus to set the TV
features to the desired configuration
for the end user.
(Continued on next page)
ASIC D27D
000
001
TIME
MY MEDIA
206-4232