Remote Jack Pack / Tv Connections & Setup - LG 26LT670H Setup Manual

Remote Jack Pack Setup
RJP Available? If you will use a Remote Jack Pack (RJP) in your system, set Installer Menu item 093
RJP AVAILABLE appropriately (for example, on a legacy model RJP: HDMI Mode, set RJP AVAILABLE
to 001). See Installer Menu detailed descriptions for further information.
093 RJP AVAILABLE
TV Connections
Make these connections ONLY after Master TV Setup and TV cloning procedures are
complete.
Refer to the appropriate figure below, and connect the RJ-45 Control cable from the RJP cable bundle to
the RJP INTERFACE port on the TV's rear jack panel. Then, connect HDMI, RGB, and Composite Video/
Audio connectors, as applicable, for the cable bundle.
LT670H Jack Panel
RJP INTERFACE
Connect RJ-45
Control cable from
RJP cable bundle.
HDMI/DVI IN 1
Connect HDMI connector
from RJP cable bundle.
LS675H Jack Panel
RJP INTERFACE
Connect RJ-45 Control
cable from RJP cable
bundle.
HDMI/DVI IN 1
Connect HDMI connector
from RJP cable bundle.
206-4213
Remote Jack Pack / TV Connections & Setup
001
RJP
INTERFACE
GAME CONTROL
/MPI
SPEAKER
OUT(8Ω)
..........
RJP
INTERFACE
GAME CONTROL
/MPI
SPEAKER OUT
(8Ω)
..........
1
RGB IN (PC)
Connect RGB connector from RJP
cable bundle (legacy RJP only).
DC IN
RESET UPDATE
RS-232C
(SERVICE & EXT POWER)
AV IN
(SERVICE ONLY)
RGB IN (PC)
/DVI IN
..........
1 2
RGB IN (PC)
Connect RGB connector from RJP
cable bundle (legacy RJP only).
RESET UPDATE
RS-232C
(SERVICE ONLY)
AV IN
PTC SERVICE
RGB IN (PC) (SERVICE ONLY)
TV-LINK CFG
/DVI IN
..........
2
AUDIO/VIDEO IN
AUDIO IN
Connect Composite Video/
(RGB/DVI)
Audio connectors from RJP
ANTENNA/
CABLE IN
cable bundle. (Composite
PTC SERVICE
Video on legacy RJP only.)
TV-LINK
CFG
AUDIO/VIDEO IN
Connect Composite Video/
AUDIO IN
(RGB/DVI)
Audio connectors from RJP
ANTENNA/
CABLE IN
cable bundle. (Composite
Video on legacy RJP only.)
49