Auxiliary Channel Bypass; Disarm/Valet Mode - Clifford Concept 650MkII Owner's Manual

Owners guide

Hide thumbs Also See for Concept 650MkII:

Table of Contents

G919730P_01-07.qxd

1/12/07

auxiliary channel bypass

Alarm sensor input zones one, two, three, and eight will be bypassed

while a pulsed or timed auxiliary Output is active.

Entering your pin code using the PlainView 2 Valet switch allows you

to disarm the system or enter valet mode without using the transmit-

ter. In valet mode, the security system will not arm, even with the trans-

mitter, but all convenience functions (door locks, boot release, etc.) will

continue to work normally.

To disarm or enter Valet Mode:

1. Turn the ignition on.

2. Enter PIN code (the factory setting is written on

EXAMPLE: To enter a code of 1203, you would press and release the

plainview switch as follows:

–

3:38 PM

Page 12

the back of this manual). Your pin code has 4

digits. To enter a digit, you press and release

the

button of the plainview 2 switch the

number of times of the digit to be entered, fol-

lowed by pressing the unmarked

enter a zero, you simple press and release the

unmarked

button.

–

button. To

–

Table of Contents

Show Quick Links

Table of Contents