Patented Remote Control Code Learning and MultiRemote™ Recognition — Allows you to add or delete, with just a few flicks of a switch, up to 4 different Clifford Anti-CodeGrabbing remote controls. Patent-Pending UltraSecure Coded Valet Mode — Ensures that no thief can turn off your Concept system like they can all other alarm brands.
Page 6
Patented Smart Prior Intrusion Attempt Alert — Specifically identifies the sensor or trigger activated by an attempted intrusion while you were away. High-Output Insignia™ Siren — Designed exclusively by Clifford Electronics for greater performance and 10 times the reliability of other alarm’s generic sirens.
Clifford’s unique PlainView™ Coded Valet switch ensures that no thief, carjacker or joy-rider can turn off your Concept 30 like they can with all other car alarm brands. Plus there’s QuietChirps™, remote...
12-volt battery. Range is up to 100 feet. Obstructions, electrical interference, weather conditions or a weak battery will reduce the range. Your 4-button/12-channel remote control is the key to your Concept 30. It incorporates Clifford’s proprietary Anti-CodeGrabbing™ (ACG) technology with Random Code Generation for the ultimate in protection against thieves “code-grabbing”...
What each button/channel does Your Concept 30 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 16–18). The following chart indicates what each remote control channel number does, and how to transmit each channel number.
HEADLIGHTS the same channel: one when the system is armed and another — OR — when it is disarmed. For instance, if your Concept 30 was so REMOTELY CLOSE wired, pressing button 2 while the alarm is armed will either...
Clifford systems have ACG with Random Code Encryption. Enhanced AutoArming™ If this feature is enabled and you forget to remotely arm your Concept 30, the system will arm itself automatically (“passively”) 30 seconds after the vehicle doors are closed.
Within seconds, thieves can disable all other alarm brands by hot-wiring the ignition and flicking an easy to find “hidden” valet switch. Your Concept 30 has safeguards that absolutely ensure that a thief cannot enable the valet mode as a way of “turning off”...
How to set your own secret valet code Since all Concept 30 systems have the same factory-set code, it is highly advisable that you set your own valet code. You may choose any 1-, 2-, or 3-digit code that does not have any zeros.
(which detects attempts to break any of the vehicle’s windows). Smart AutoTesting™ Each time you remotely arm your Concept 30, it will perform a series of tests on all triggers and sensors. If the hood or trunk is open when you arm the system, your Concept 30 will immediately alert you of the problem by issuing 4 chirps and 4 parking light flashes instead of the usual 2 and 2.
Automatic malfunction bypass To provide the utmost protection even if a system component malfunctions, your Concept 30 will automatically bypass the faulty point and arm all other triggers and sensors until you can have the system serviced by your local Authorized Dealer.
Your Concept 30 automatically prevents engine starting while the system is armed. Clifford’s fault-proof design ensures that you can start the engine even in the unlikely event of a full system failure (other brands of alarms can leave the driver stranded).
To disconnect power for servicing, simply insert your key into the ignition and turn it to the “ON” position before reconnecting power. Concept 30 recognizes this an an authorized power reconnection and will not alarm.
User-selectable features Your Concept 30 vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just press the PlainView switch a few times.
Page 19
# of Factory Feature momentary setting taps Siren 30 sec. Duration FACT — False Alarm Control and Test Headlight Reminder Add a New Remote to Press remote control button 1 — Channel 1 (arm/disarm) Add a New Remote to Channel 2 —...
Authorized Clifford Dealer (or call our 24-hour Customer Service Department at 800-824-3208) and program them into the system yourself. Each Concept 30 will respond to as many as four 12-channel remote controls. To add a new remote control to the system, use the procedures noted in the User-selectable features section on pages 16–17.