Related Manuals for Clifford Concept 200
Summary of Contents for Clifford Concept 200
- Page 1 The Science of Security™ ONCEPT Complete Owner’s Manual USA Headquarters ❖ Canada Headquarters ❖ UK Headquarters ❖ Germany Headquarters ❖ Mexico Headquarters ❖...
-
Page 2: Standard Features
United Kingdom customers: Please pardon our American English references and spellings. Trunk and hood references indicate the boot and bonnet, respectively; parking lights are indicator lights; gas/gasoline is petrol; a parking lot is a car park. EC-approved (Europe) þ Lifetime warranty (see terms & conditions) þ... -
Page 3: Maintenance
Concept 200’s BlackJax feature provides a safe and effective means of recovering your vehicle after a theft or carjacking. In a carjacking situation, the sooner you are out of the car the better. Don’t resist or take anything with you, just get out and get away. The instant the car door is opened, your Concept 200 takes charge. -
Page 4: "Guessing" Your Code Won't Help A Carjacker
But these remote controls are much more secure than car keys because each incorporates our ACG 2 (Anti-CodeGrabbing 2) technology with trillions of digital codes for the ultimate protection against remote control cloning devices. You will use your Concept 200 remote control to arm and disarm the system, lock and unlock the doors, activate/deactivate the panic feature, enter/exit valet mode and command options such as a remote trunk release, power window control, electric garage door interface or even remote starting of the engine and heater or air conditioner, among other options. -
Page 5: Acg 2 (Anti-Codegrabbing 2™)
“smart” code-grabbers can even decipher the code hopping/jumping sequence used by other car alarm manufacturers. In contrast, your Concept 200 uses complex digital signal processing and unbreachable code encryption to randomly change the digital code every time you use the remote control. -
Page 6: Automatic Remote Control Low-Battery Warning
If your remote control battery is low, you’ll hear an unusually low-pitched chirp when you remotely disarm your Concept 200. Replacement batteries are available from any Authorized Clifford Dealer. Replacement of a remote control battery is fairly easy, but any Authorized Clifford Dealer will be happy to do it for you without cost provided that you buy the replacement battery at their shop (it’s also a good idea to keep a spare of each battery in your glove box just in case). -
Page 7: Remote Controlled Valet Mode
All car alarms have a valet mode that turns off the security features. This mode turns off the alarm if the system is not responding to the remote. However, thieves disable other alarms by flicking this easy-to-find “hidden” valet switch. In contrast, your system has safeguards that ensure a thief cannot enable the valet mode as a way of “turning off”... -
Page 8: Remotely Adjustable Dual-Zone Piezo Sensor
The Dual-Zone Piezo Sensor detects theft-related vibrations/ impacts and triggers the alarm. It also has a secondary warning zone that can detect less serious occurrences — such as someone bumping your car with their car door — and will sound a brief warning tone. If needed, you can adjust sensitivity of these sensor zones via your remote control as described in the following section. -
Page 9: Timer Options
1 of the master remote or the the system is armed, your Concept 200 will continue to idle the engine for any duration you choose up to 4 minutes. To ensure against any possibility of false alarms, the system will keep the sensors off-line while the engine is idling, then automatically bring them back online right after the engine is shut down. -
Page 10: Smart Prior Intrusion Attempt Alert
Headlights left on warning* Your Concept 200 can be set to issue a warning sound if you shut off the engine and open a door without first turning off the headlights. This feature is factory set to off since most vehicles already have a similar feature. To have this feature set on, please see your installing Authorized Clifford Dealer. -
Page 11: User-Selectable Features
You may set many of the features to your own preferences. Once you’ve changed a few settings, you’ll find that programming the system is so easy that you can even do it while driving. The system comes with all of its features preprogrammed as noted by the bold type in the Table of user-selectable features. To change any of the settings, use the steps noted below. - Page 12 Clifford G4 system on your other vehicle(s). For instance, to set button ✱ of the other car ’s companion remote to arm and disarm your Concept 200, select column 4, row 1, then press button ✱ of the other vehicle’s remote (you’ll hear one chirp).