Intellistart And Smartwindows Sensor Bypass; Auxiliary Channel Bypass; Panic Mode With Smart Door Locking - Clifford AvantGuard 5.1 Owner's Manual

Clifford owner's guide vehicle security remote start system avantguard 5.1

Hide thumbs Also See for AvantGuard 5.1:

Table of Contents

intellistart and smartwindows sensor bypass

When the system sees a command to start the vehicle via the

Intellistart, it bypasses all sensors and will continue to bypass these sen-

sors until the remote start shuts down.

When the system sees a SmartWindows command for up or down

operation, the unit will automatically bypass all sensors until the win-

dows complete their operation.

All sensor will be bypassed while a pulsed or timed auxiliary output

channel is active.

If you are threatened in or near your vehicle, you can attract attention

by triggering the system with your transmitter! Just press

for

two seconds to enter Panic Mode. The siren will sound and the park-

ing lights will flash for the programmed duration. If the ignition is on,

the doors will lock; if the ignition is off, the doors will unlock. To stop

Panic Mode at any time press

on the transmitter again.

Table of Contents

Show Quick Links

Table of Contents