Connecting The Ac Adapter - Gateway 450 User Manual

Chapter 2: Getting Started

Connecting the AC adapter

You can run your notebook using an AC adapter or the notebook battery. The
battery was shipped to you partially charged. You should use the AC adapter
right away to fully charge the battery. Allow 24 hours for the battery to fully
charge.
Important
To connect the AC adapter:
1
Connect the power cord to the AC adapter.
Warning
20
If the battery is not fully charged before you use your
notebook on battery power for the first time, the battery life
may be much shorter than you expect. If the battery life
seems short even after being charged for 24 hours, the
battery may need to be recalibrated. For information, see
"Recalibrating the battery" on page 142.
Make sure that you use the AC adapter that came with
your notebook.
Replace the power cord if it becomes damaged. The
replacement cord must be of the same type and voltage
rating as the original cord or your notebook may be
damaged.
www.gateway.com