Smt Menus Overview; Table 135 Main Menu Summary; Table 136 Smt Menus Overview - ZyXEL Communications ZyWALL 2Plus User Manual

The following table describes the fields in this menu.

Table 135 Main Menu Summary

NO. MENU TITLE
1 General Setup
2 WAN Setup
3 LAN Setup
4 Internet Access Setup
11 Remote Node Setup
12 Static Routing Setup
15 NAT Setup
21 Filter and Firewall
Setup
22 SNMP Configuration
23 System Password
24 System Maintenance
26 Schedule Setup
99 Exit

23.3.2 SMT Menus Overview

The following table gives you an overview of your ZyWALL's various SMT menus.

Table 136 SMT Menus Overview

MENUS
1 General Setup
2 WAN Setup
3 LAN Setup
4 Internet Access Setup
Chapter 23 Introducing the SMT
FUNCTION
Use this menu to set up device mode, dynamic DNS and administrative
information.
Use this menu to clone a MAC address from a computer on your LAN
and configure the backup WAN dial-up connection.
Use this menu to apply LAN filters, configure LAN DHCP and TCP/IP
settings.
Configure your Internet access setup (Internet address, gateway, login,
etc.) with this menu.
Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
Configure IP static routes in this menu.
Use this menu to configure Network Address Translation.
Configure filters and activate/deactivate the firewall.
Use this menu to configure SNMP-related parameters.
Change your password in this menu (recommended).
From displaying system status to uploading firmware, this menu
provides comprehensive system maintenance.
Use this menu to schedule outgoing calls.
Use this menu to exit (necessary for remote configuration).
SUB MENUS
1.1 Configure Dynamic DNS
2.1 Advanced WAN Setup
3.1 LAN Port Filter Setup
3.2 TCP/IP and DHCP
Ethernet Setup
ZyWALL 2 Plus User's Guide
1.1.1 DDNS Host Summary
3.2.1 IP Alias Setup
1.1.1 DDNS Edit Host
371