Applying Remote Node Filters; Figure 275 Filtering Lan Traffic; Figure 276 Filtering Remote Node Traffic - ZyXEL Communications ZyWALL 2Plus User Manual

ZyWALL 2 Plus User's Guide

Figure 275 Filtering LAN Traffic

32.7.2 Applying Remote Node Filters

Go to menu 11.1.4 (shown below – note that call filter sets are only present for PPPoE
encapsulation) and enter the number(s) of the filter set(s) as appropriate. You can cascade up to
four filter sets by entering their numbers separated by commas. The ZyWALL already has
filters to prevent NetBIOS traffic from triggering calls, and block incoming telnet, FTP and
HTTP connections.

Figure 276 Filtering Remote Node Traffic

452
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Menu 11.1.4 - Remote Node Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Chapter 32 Filter Configuration