Table of Contents
Advertisement
Configuring Windows 95 OSR2
Step 1
After you have installed the modem into your machine, turn on the power
and allow the system to boot normally.
Step 2
Windows 95 will start the Update Device Driver Wizard and immediately
identify the modem as a "PCI Communications Device". Check the drive
path for the correct drive letter. It may be necessary to change the drive
letter to that of the CD-ROM drive. Insert the modem's installation CD-
ROM into your computer's CD-ROM drive. Wait about 10 seconds, so
that the CD-ROM can be read by your system, then click the Next button.
Step 3
At the next screen, Windows will ask if you want to use the driver for the
"56K PCI Call Waiting Modem." Click Finish. Windows will complete the
installation of the modem.
12
Advertisement
Table of Contents
