Advanced Programming; Changing The Custom Mode Settings - Precor Move Beyond EFX556 NAVY Owner's Manual

C O M M E R C

Advanced Programming

These next few pages provide information that lets you customize the EFX. This
section covers the following information about how to:
• determine which language appears on the display
• set maximum workout and pause times
• display the odometer and other useful information
• connect to CSAFE compatible devices

CHANGING THE CUSTOM MODE SETTINGS

The custom settings are accessed through specific codes that help eliminate
unauthorized access. Refer to Diagram 25 to locate the keys. Information that
you can access and features that can be customized are as follows:
• Language — Choose to display English, German, Spanish, French, Dutch,
or Portuguese.
• Units of Measure — Select between U.S. Standard and Metric displays.
• Maximum Workout Time — Sets a maximum limit on workout time.
Note: Remember the additional five minute cool-down period appended to a
completed course, so adjust the maximum time limit accordingly.
• Maximum Pause Time — Sets the maximum duration for which a person
can "pause" his or her workout.
• Odometer, Hours of Use, Software Version, and Error Log —The EFX
stores the cumulative strides, the number of hours that the unit has been in
use, the software version and software type (which is valuable when calling
Customer Support), and an error log (useful when troubleshooting).
To access the Custom settings, the following must occur:
❑
Electrical power must be supplied.
The foot pedal speed must be maintained at 40 strides per minute. Or, the
optional battery recharger must be plugged into the EFX and connected to
an appropriate power source.
❑
Check that the Precor banner appears on the display and maintain the
minimum stride rate.
❑
Press the appropriate key sequences.
Important: To access the Custom Mode, press Reset while the Precor banner is
displayed. Within 1/2 second, begin pressing the key sequences. If the system
does not detect a key press (within 1/2 second after Reset), it returns to the
banner. Once you begin entering a key sequence, each key must be pressed
within four seconds of the other or the Precor banner reappears and you have to
begin again.
page 42
I A L P R O D U C T S D I V I S I O N