Club Features; Club Programming Tips - Precor EFX 576i Owner's Manual

Club Features

These next few pages provide information that lets you customize
the EFX for your club. All these features remain hidden to the club
patrons and can only be accessed using special key presses. Read
this section if you want to:
• Change the display to a different language
• Set the maximum workout and pause times
• Set a cool-down time limit
• Change the display to U.S. Standard or Metric
• View the odometer
• Display the number of hours the EFX has been in use
• View the software versions and part numbers
• Check the error log
• Display the serial number
• Connect to CSAFE equipment
Product Owner's Manual: Club Features

Club Programming Tips

• Electrical power must be supplied. A minimum stride rate (40
strides per minute) must be maintained while programming the
EFX. A constant power source is available if you use the optional
power adapter. If you plan to program the EFX, purchasing the
optional power adapter is highly recommended.
Note: If you do not use the optional power adapter and the
pedaling speed falls below 40 spm, no warning is given when the
EFX moves into its 30-second shutdown procedure.
• The club programming mode is accessed by pressing the RESET
key at the Precor banner. The remaining key presses must occur
quickly and without pause. Always start at the Precor banner.
• The function of the QUICKSTART key is disabled while in club
programming mode.
• The club programs appear sequentially. Pressing the ENTER key
saves the changes you make and moves you through the
programs. To exit a program without saving any changes, press
the RESET key.
9