Toshiba Tecra A3-S711 Maintenance Manual page 150

4 Replacement Procedures
4. Remove the four embedded screws securing the heat sink in the order indicated on the heat sink.
Lift out the heat sink while preventing stress to the CPU below.
5. Turn the cam on the CPU socket with a flat-blade screwdriver so that the notch on the cam is
aligned with the open side of the CPU socket to unlock the CPU.
6. Gently lift out the CPU.
4-38
Figure 4-33 Removing the fan module
Figure 4-34
Figure 4-35
Removing the heat sink
Removing the CPU
Tecra A3/S2 Series Maintenance Manual