Toshiba Satellite A300 series Maintenance Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite A300 Series
  6. Maintenance manual

Toshiba Satellite A300 series Maintenance Manual

Maintenance manual
Hide thumbs Also See for Satellite A300 series:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Toshiba Personal Computer
Satellite A300
Maintenance Manual
TOSHIBA CORPORATION
File Number 960-Q08
Satellite A300 Maintenance Manual (960-Q08)

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite A300 series

Summary of Contents for Toshiba Satellite A300 series

  • Page 1 Toshiba Personal Computer Satellite A300 Maintenance Manual TOSHIBA CORPORATION File Number 960-Q08 Satellite A300 Maintenance Manual (960-Q08)
  • Page 2 The information presented in this manual has been reviewed and validated for accuracy. The included set of instructions and descriptions are accurate for the Satellite A300 Series at the time of this manual's production. However, succeeding computers and manuals are subject to change without notice.
  • Page 3 NOTE: “Note” contains general information that relates to your safe maintenance service. Improper repair of the computer may result in safety hazards. Toshiba requires service technicians and authorized dealers or service providers to ensure the following safety precautions are adhered to strictly.

  • Page 4: Overview

    The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite A300 system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describes how to perform test and diagnostic operations for maintenance service.
  • Page 5 Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the computer that appears on its display is presented in the typeface below: Format complete System transferred Satellite A300 Maintenance Manual (960-Q08)

  • Page 6: Table Of Contents

    Troubleshooting ......................1 Troubleshooting Flowchart....................3 Power Supply Troubleshooting ..................7 Procedure 1 Power Status Check ..............7 Procedure 2 Error Code Check ..............9 Procedure 3 Connection Check..............10 Procedure 4 Charging Check ...............11 Procedure 5 Replacement Check ..............12 Satellite A300 Maintenance Manual (960-Q08)
  • Page 7 Diagnostic Test Program Execution Check ......31 Procedure 2 Connector Check and Replacement Check......32 Touch pad Troubleshooting ..................33 Procedure 1 Diagnostic Test Program Execution Check ......33 Procedure 2 Connector Check and Replacement Check......34 Satellite A300 Maintenance Manual (960-Q08)
  • Page 8 Fingerprint Troubleshooting ..................49 Procedure 1 Diagnostic Test Program Execution Check ......49 Procedure 2 Connector Check and Replacement Check......49 2.17 Bluetooth Troubleshooting ..................50 Procedure 1 Diagnostic Test Program Execution Check ......50 Procedure 2 Connector Check and Replacement Check......50 Satellite A300 Maintenance Manual (960-Q08)
  • Page 9 Write DMI Information……………………………………………3-55 3.18 Log Utilities ......................3-57 3.18.1 Operations…………………………………………………………3-57 ..3.19 System Configuration ....................3-59 3.20 Running Test Edit Item.................... 3-60 3.20.1 Function Description………………………………………………3-60 ..3.20.2 Operation Description……………………………………………3-60 3.21 Tests an Operation ..................3-62 Common Satellite A300 Maintenance Manual (960-Q08)
  • Page 10 Optical disk drive..................... 4-26 4.10 Display assembly ..................... 4-28 4.11 Bluetooth assembly....................4-33 4.12 Cover assembly......................4-38 4.13 Touch pad......................... 4-40 4.14 Audio board ......................4-40 4.15 Fingerprint board ..................... 4-41 4.16 USB board........................ 4-42 4.17 System board......................4-45 Satellite A300 Maintenance Manual (960-Q08)
  • Page 11 4.18 CPU..........................4-47 4.19 VGA heat sink......................4-50 4.20 LCD unit / FL inverter ..................... 4-52 Satellite A300 Maintenance Manual (960-Q08)
  • Page 12 Appendix C Pin Assignments.....................C-1 Appendix D Keyboard Scan/Character Codes ..............D-1 Appendix E Key Layout.....................E-1 Appendix F Wiring Diagrams.................... F-1 Appendix G BIOS Rewrite Procedures ................G-1 Appendix H EC/KBC Rewrite Procedures................ H-1 Appendix I Reliability......................I-1 Satellite A300 Maintenance Manual (960-Q08)
  • Page 13 Satellite A300 Maintenance Manual (960-Q08)

  • Page 14: Chapter 1 Hardware Overview

    Chapter 1 Hardware Overview Satellite A300 Maintenance Manual (960-Q08)

  • Page 15: Chapter 1 Hardware Overview

    Chapter 1 Hardware Overview Hardware Overview Satellite A300 Maintenance Manual (960-Q08)

  • Page 16: System Block Diagram

    TFT Color Display.......................19 1.6.1 LCD Module ..................19 1.6.2 FL Inverter Board...................22 1.6.3….. FL Inverter Board………………………………………………… … 22 Power Supply .......................24 Batteries ........................25 1.8.1 Main Battery...................25 1.8.2 Battery Charging Control ...............26 1.8.3 RTC battery ....................27 AC Adapter ........................28 Satellite A300 Maintenance Manual (960-Q08)
  • Page 17 Table 1-7 Battery specifications..................25 Table 1-8 Time required for charges of main battery ............26 Table 1-9 Data preservation time ..................26 Table 1-10 Time required for charges of RTC battery............27 Table 1-11 AC adapter specifications ................28 Satellite A300 Maintenance Manual (960-Q08)

  • Page 18: Features

    Chapter 1 Hardware Overview Features Features The Satellite A300 series are 2 spindle PCs running Intel® Core™2 Duo Processor T8100 or higher. Intel® Core™2 Duo Processor T9300 or higher. Intel® Pentium Dual Processor T2330or higher. Intel® Celeron 540 Processor or higher.
  • Page 19 Supported via a RGB connector. θ Keyboard Toshiba Standard keyboard with 86-88 keys (desktop-style), Support Windows keys & Application keys. (Toshiba standard layout) Standard pitch, 2.5mm travel length. Multi-langue support θ New Dummy card slot Satellite A300 Maintenance Manual (960-Q08)
  • Page 20 The wireless LAN is equipped on the mini card slot. θ LAN/MODEM Connectors for LAN and Modem are separately mounted. θ 1394 One 1394 port is equipped. θ Multiple Digital Media Card Slot XD/MS/MS pro/SD/MMC are supported θ Bluetooth Satellite A300 Maintenance Manual (960-Q08)

  • Page 21: Figure 1-1 Front Of The Computer

    USB Bluetooth Module standard Ver 2.1 & EDR(Enhanced Data Rate) equipped θ Security Kensington Lock, Fingerprint –Enhanced Lock is also equipped. θ HDD Password θ 3D Accelerometer for HDD Figure 1-1 Front of the computer Satellite A300 Maintenance Manual (960-Q08)
  • Page 22 Chapter 1 Hardware Overview Satellite A300 Maintenance Manual (960-Q08)

  • Page 23: System Block Diagram

    Chapter 1 Hardware Overview System Block Diagram Figure 1-2 shows the system block diagram. Figure 1-2 System block diagram for Intel Platform Satellite A300 Maintenance Manual (960-Q08)
  • Page 24 4GB(2GB for GL960). • 200-pin SO-DIMM • 1.8V operation θ BIOS ROM (Flash memory) • 8Mbit θ Chipset (Santa Rosa Platform) This gate array has the following elements and functions. Satellite A300 Maintenance Manual (960-Q08)
  • Page 25 10/100 LAN controller (Marvell 88E8040T-A0-NNC1C000) • GIGA LAN controller (Marvell 88E8072-B1-NNC1C000) θ Mini Card Wireless LAN card (BTO) 5.4 GHz DSSS/OFDM LAN card is equipped. Conformity with IEEE 802.11b/g, IEEE 802.11 a/g/n and IEEE 802.11a/b/g.. Satellite A300 Maintenance Manual (960-Q08)
  • Page 26 The transfer speed of data receiving is 56kbps, of data sending is 33.6kbps and of FAX is 14.4kbps. Actual speed depends on the quality of the line used. Connected to telephone line through RJ11 MOD Satellite A300 Maintenance Manual (960-Q08)

  • Page 27: Inch Hard Disk Drive

    Height (mm) dimens Depth (mm) 100.2 +/- 0.25 ions Weight (g) 97/98 97/98 101//102 101//102 Parameter Standard value FUJITSU FUJITSU FUJITSU FUJITSU MHY2120BH MHY2160BH MHY2200BH MHY2250BH Width (mm) Outline Height dimensi (mm) Depth (mm) 101(Max) Weight Satellite A300 Maintenance Manual (960-Q08)
  • Page 28 95 (max.) 95 (max.) 102 (max.) 102 (max.) Weight (g) Table 1-2 2.5-inch HDD dimensions Parameter Standard value FUJITSU FUJITSU FUJITSU MHX2250BT MHX2300BT MHZ2400BT Width (mm) Outline Height 12.5 dimensi (mm) Depth 70.0 (mm) 101(Max) Weight Satellite A300 Maintenance Manual (960-Q08)

  • Page 29: Table 1-2 2.5-Inch Hdd Specifications

    200GB 250GB (formatted) Speed (RPM) 5,400 Data transfer Rate - To/From Media 84.6MB/s Max. - T0/From Host 1.5Gbps (150MB/s) bus transfer rate 1.5Gbps(150MB/s) (MB/s) 12.0ms/14.0ms Average random seek time (read) (ms) Power-on-to-ready 4.0 (typ.) (sec) Satellite A300 Maintenance Manual (960-Q08)
  • Page 30 400GB (formatted) Speed (RPM) 4,200 Data transfer Rate - To/From Media 6０.8MB/s Max. - T0/From Host 1.5Gbps (150MB/s) bus transfer rate 1.5Gbps (150MB/s) (MB/s) 12.0ms/14.0ms Average random seek time (read) (ms) Power-on-to-ready 4.0 (typ) (sec) Satellite A300 Maintenance Manual (960-Q08)

  • Page 31: Optical Drive

    Chapter 1 Hardware Overview 1.4 Optical Drive Satellite A300 Maintenance Manual (960-Q08)

  • Page 32: 2Dvd Super Multi Drive

    Table 1-3 DVD Super Multi drive outline dimensions Parameter Standard Value Maker TS-L632P DVR- DVR- L632H KD08TBT KD08TBL Width 122.4 122.4 (mm) Outline Height 12.7 12.7 12.7 12.7 dimension (mm) Depth (mm) Mass 176.2 176.2 Satellite A300 Maintenance Manual (960-Q08)

  • Page 33: Table 1-4 Dvd Super Multi Drive Specifications (1/4)

    130 ms Ave.140(CD-ROM Ave.140(CD-ROM CD-ROM Mode1Disc is used) Mode 1 Disc is used) Access time (ms) (Random) 130 ms 130 ms Ave.150 Ave.150 DVD-ROM (DVD-ROM Single (DVD-ROM Single Layer Disc is used) Layer Disc is use Satellite A300 Maintenance Manual (960-Q08)
  • Page 34 Single layer, Single 4.7G DVD+- 4.7G DVD+- R/RW (Read & R/RW (Read & Write) Write) DVD+-R Dual DVD+-R Dual (Read & Write) (Read & Write) DVD-RAM DVD-RAM (Read (Read & Write) &Write)80mm 80mm DVD Satellite A300 Maintenance Manual (960-Q08)

  • Page 35: Keyboard

    Chapter 1 Hardware Overview 1.5 Keyboard The Satellite A300 keyboard has one kind of placement that is for US/UK style. Figure 1-5 is a view of the keyboard for US/UK style Figure 1-5 Keyboard for US/UK style See Appendix E for details of the keyboard layout.

  • Page 36: Figure 1-6 Auo Lcd Module

    Chapter 1 Hardware Overview Color Display The Satellite A300 Panel has two different kinds of model, one is single lamp LCD and the other is dual lamp LCD. 1.6.1 LCD Module with Single lamp Figure 1-6 ~ 1-9 shows a view of the LCD module and Table 1-5-1 lists the specifications.

  • Page 37: Figure 1-7 Cmo Lcd Module

    Chapter 1 Hardware Overview Figure 1-7 CMO LCD Module Figure 1-8 LG LCD Module Satellite A300 Maintenance Manual (960-Q08)

  • Page 38: Figure 1-9 Sam Lcd Module(Single)

    Chapter 1 Hardware Overview Figure 1-9 SAM LCD Module Table 1-5-1 LCD module specifications (Single) Specifications(WXGA) Item LG LP154WX4- Samsung AUO B154EW08 CMO N154I3-L03 TLC8 LTN154AT07-T01 Number of Dots 1,280x 800 Dot spacing (mm) 0.2588(H)× 0.2588(V) Satellite A300 Maintenance Manual (960-Q08)

  • Page 39: 2Fl Inverter Board

    Table 1-5-3 FL inverter board specifications-Single lamp Specifications Foxconn Delta SUMIDA Item T18I095.00 DAC-08N035 TWS-449-308 TBD485NR Voltage (V) 8~20 8~20 7~20 8~20 Input Power (W) 7.5W 7.5W 7.5W 7.5W Voltage (Vrms) Output 612~945 612~945 612~945 612~945 Satellite A300 Maintenance Manual (960-Q08)

  • Page 40: Table 1-5-4 Fl Inverter Board Specifications-Dual Lamp

    Table 1-5-4 FL inverter board specifications-Dual lamp Specifications Item Foxconn SUMIDA T18I096.00 TWS-449-309 TBD487NR Voltage (V) 8~20 8~20 8~20 Input Power (W) 7.5W 7.5W 7.5W Voltage (Vrms) 612~945 612~945 612~945 Output Current 2.3±0.4 ~ 6.5±0.3 (f=55KHz)(mArms) Satellite A300 Maintenance Manual (960-Q08)

  • Page 41: Table 1-6 Power Supply Output Rating

    Power supply （Yes/No） Name Power OFF Power OFF Voltage [V] No Battery Suspend mode Boot mode +5VPCU +5V_S5 +5VSATA USBPWR1 +5V_TP VCCRTC TH_FAN_POWER 3.1~5 +3VPCU +3V_S5 +3VSUS CCD_POWER VCC_XD +1.8VSUS +1.5V 1.25 +1.25V 1.05 +1.05V 0.55~1.575 VCC_CORE Satellite A300 Maintenance Manual (960-Q08)

  • Page 42: Batteries

    17mAh MOLEX-58ZL1 1.8.1 Main Battery The main battery is the primary power supply for the computer when the AC adapter is not connected. In Standby, the main battery maintains the current status of the computer. Satellite A300 Maintenance Manual (960-Q08)

  • Page 43: 2Battery Charging Control

    About 3 days Hibernation About 1 month Battery 3 cell Approximately 1.5 days(sleep mode) Pack 6 cell Approximately 3 days(sleep mode) 9 cell Approximately 5 days(sleep mode) Approximately 1 month(shutdown mode,All type of battery pack Satellite A300 Maintenance Manual (960-Q08)

  • Page 44: 3Rtc Battery

    Table 1-10 lists the Time required for charges of RTC battery and data preservation time. Table 1-10 Time required for charges of RTC battery Condition Time Power ON (Lights Power LED) About 24 hours Data preservation tome (Full-charged) About a month Satellite A300 Maintenance Manual (960-Q08)

  • Page 45: Ac Adapter

    Table 1-11 AC adapter specifications Parameter Specification With Led DELTA/ LITE-ON DELTA/ LITE-ON DELTA/ LITE-ON Power 120W Input voltage AC 100V/240V Input frequency 50Hz/60Hz Input current ≦ 1.5A Output voltage DC 19V Output current 3.95A 4.74A 6.3A Satellite A300 Maintenance Manual (960-Q08)
  • Page 46 Chapter 1 Hardware Overview Features The Satellite A300 (10A) (AMD Platform) features are listed below. θ Microprocessor Microprocessor that is used will be different by the model. It supports processors as follows AMD Athlon X2 1600 TK57 (1.9GHz) AMD Turion64 X2 1600 TL60(2.0GHz)
  • Page 47 Supported via a 4-pins S-Video connector θ Keyboard Toshiba Standard keyboard with 86-88 keys (desktop-style), Support Windows keys & Application keys. (Toshiba standard layout) Standard pitch, 2.5mm travel length. Multi-langue support. θ New Dummy card slot The new card slot (dummy card) accommodates one 5mm Type II card. The slot support 16-bit PC cards.
  • Page 48 The wireless LAN is equipped on the mini card slot. θ LAN/MODEM Connectors for LAN and Modem are separately mounted. θ 1394 One 1394 port is equipped. θ Multiple Digital Media Card Slot XD/MS/MS pro/SD/MMC are supported θ Bluetooth Satellite A300 Maintenance Manual (960-Q02)
  • Page 49 Chapter 1 Hardware Overview USB Bluetooth Module (BTO) V2.1 & EDR(Enhanced Data Rate) equipped θ Security Kensington Lock, Fingerprint –Enhanced Lock is also equipped. HDD Password Figure 1-1 Front of the computer Satellite A300 Maintenance Manual (960-Q02)
  • Page 50 Chapter 1 Hardware Overview System Block Diagram Figure 1-2 shows the system block diagram. Figure 1-2 System block diagram for AMD Platform Satellite A300 Maintenance Manual (960-Q02)
  • Page 51 • North Bridge (AMD RS690M) − AMD HyperTransport Interface support − PCI Express Interface 1.1a support − A-Link Express II Interface − 465-ball 21 x 21mm FC-BGA Package • South Bridge (AMD SB600) − A-Link Express II Interface (1/2/4-lane) Satellite A300 Maintenance Manual (960-Q02)
  • Page 52 The modem supports V.92/V.90 analog receive data up to 56 kbps with V.44 data compression, V.17 analog fax to 14.4 kbps, voice/telephone answering machine (TAM), high quality soft speakerphone. θ Bluetooth USB Bluetooth Module. Bluetooth standard V2.1 +EDR conformity. Satellite A300 Maintenance Manual (960-Q02)
  • Page 53 A compact, high-capacity HDD with a height of 9.5mm. Contains a 2.5-inch magnetic disk and magnetic heads. Figure 1-3 shows a view of the 2.5-inch HDD and Tables 1-1 and 1-2 list the specifications. Figure 1-3 2.5-inch HDD Satellite A300 Maintenance Manual (960-Q02)
  • Page 54 HTS542520k9SA HTS542525k9S 69.85 +/- 0.25 Width (mm) Outlin Height (mm) dimen 100.2 +/- 0.25 Depth (mm) sions 95 (max.) 95 (max.) 102 (max.) 102 (max.) Weight (g) Table 1-2 2.5-inch HDD dimensions Parameter Standard value Satellite A300 Maintenance Manual (960-Q02)
  • Page 55 320GB Speed (RPM) 5,400 Data transfer Rate 794Mbits 730Mbits Media Media - To/From Media 300MBytes Host 3GBytes - T0/From Host Host 1.5Gbps(150MB/s) bus transfer rate (MB/s) Average random seek time (read) (ms) Power-on-to-ready (sec) 3.5(typ)/9.5(Max) Satellite A300 Maintenance Manual (960-Q02)
  • Page 56 Speed (RPM) 5,400 Data transfer Rate - To/From Media 65.5MB/s 65.5MB/s 65.5MB/s 65.5MB/s - T0/From Host 1.5Gbps 1.5Gbps 1.5Gbps 1.5Gbps bus transfer rate (MB/s) 150 (MB/s Average random seek time (read) (ms) Power-on-to-ready (sec) 3.5 sec Satellite A300 Maintenance Manual (960-Q02)
  • Page 57 400GB (formatted) Speed (RPM) 4,200 Data transfer Rate - To/From Media 6０.8MB/s Max. - T0/From Host 1.5Gbps (150MB/s) bus transfer rate 1.5Gbps (150MB/s) (MB/s) 12.0ms/14.0ms Average random seek time (read) (ms) Power-on-to-ready 4.0 (typ) (sec) Satellite A300 Maintenance Manual (960-Q02)
  • Page 58 Chapter 1 Hardware Overview 1.4 Optical Drive Satellite A300 Maintenance Manual (960-Q02)
  • Page 59 Table 1-3 DVD Super Multi drive outline dimensions Parameter Standard Value Maker TS-L632P DVR- DVR- L632H KD08TBT KD08TBL Width 122.4 122.4 (mm) Outline Height 12.7 12.7 12.7 12.7 dimension (mm) Depth (mm) Mass 176.2 176.2 Satellite A300 Maintenance Manual (960-Q02)
  • Page 60 (3X-5X Zone-CLV write) 16.6(PIO 16.6(PIO 33.2MB/s 33.2MB/s Mode4/MultiwordDM ATAPI Mode4/MultiwordDMA A Mode2) interface Mode2) 33.3(UltraDMAMode2 (MB/s) 33.3(UltraDMA Mode2) Access time 130 ms 130 ms Ave.140(CD-ROM Ave.140(CD-ROM CD-ROM Mode1Disc is used) Mode 1 Disc is used) (ms) (Random) Satellite A300 Maintenance Manual (960-Q02)
  • Page 61 Single layer, Single 4.7G DVD+- 4.7G DVD+- R/RW (Read & R/RW (Read & Write) Write) DVD+-R Dual DVD+-R Dual (Read & Write) (Read & Write) DVD-RAM DVD-RAM (Read (Read & Write) &Write)80mm 80mm DVD Satellite A300 Maintenance Manual (960-Q02)
  • Page 62 Chapter 1 Hardware Overview 1.5 Key board The Satellite A300 keyboard has one kind of placement; one is for US/UK style Figure 1-5 is a view of the keyboard for US style Figure 1-5 Keyboard for US/UK style Satellite A300 Maintenance Manual (960-Q02)
  • Page 63 Chapter 1 Hardware Overview Color Display The Satellite A300 Panel has two different kinds of model, one is single lamp LCD and the other is dual lamp LCD. 1.6.1 LCD Module with Single lamp Figure 1-6 ~ 1-9 shows a view of the LCD module and Table 1-5-1 lists the specifications.
  • Page 64 Chapter 1 Hardware Overview Figure 1-7 CMO LCD Module Figure 1-8 LG LCD Module Satellite A300 Maintenance Manual (960-Q02)
  • Page 65 Chapter 1 Hardware Overview Figure 1-9 SAM LCD Module Table 1-5-1 LCD module specifications (Single) Specifications(WXGA) Item LG LP154WX4- Samsung AUO B154EW08 CMO N154I3-L03 TLC8 LTN154AT07-T01 Number of Dots 1,280x 800 Dot spacing (mm) 0.2588(H)× 0.2588(V) Satellite A300 Maintenance Manual (960-Q02)
  • Page 66 Table 1-5-3~1-5-4 lists the FL inverter board specifications. Table 1-5-3 FL inverter board specifications-Single lamp Specifications Foxconn Delta SUMIDA Item T18I095.00 DAC-08N035 TWS-449-308 TBD485NR Voltage (V) 8~20 8~20 7~20 8~20 Input Power (W) 7.5W 7.5W 7.5W 7.5W Satellite A300 Maintenance Manual (960-Q02)
  • Page 67 Table 1-5-4 FL inverter board specifications-Dual lamp Specifications Item Foxconn SUMIDA T18I096.00 TWS-449-309 TBD487NR Voltage (V) 8~20 8~20 8~20 Input Power (W) 7.5W 7.5W 7.5W Voltage (Vrms) 612~945 612~945 612~945 Output Current 2.3±0.4 ~ 6.5±0.3 (f=55KHz)(mArms) Satellite A300 Maintenance Manual (960-Q02)
  • Page 68 Table 1-6 RS690M Power supply output rating Power supply （Yes/No） Name Power OFF Power OFF Voltage [V] No Battery Suspend mode Boot mode +5VPCU +3VPCU +3V_S5 +3VSUS +2.5V +1.8VSUS +SMDDR_VTERM +SMDDR_VREF +1.8V +1.5V 1.25 +1.2V 1.25 +1.2V_S5 +NB_CORE 1.0~1.2 VCC_CORE 0.7~1.2 Satellite A300 Maintenance Manual (960-Q02)
  • Page 69 17mAh MOLEX-58ZL1 1.8.1 Main Battery The main battery is the primary power supply for the computer when the AC adapter is not connected. In Standby, the main battery maintains the current status of the computer. Satellite A300 Maintenance Manual (960-Q02)
  • Page 70 About 3 days Hibernation About 1 month Battery 3 cell Approximately 1.5 days(sleep mode) Pack 6 cell Approximately 3 days(sleep mode) 9 cell Approximately 5 days(sleep mode) Approximately 1 month(shutdown mode,All type of battery pack Satellite A300 Maintenance Manual (960-Q02)
  • Page 71 Table 1-10 lists the Time required for charges of RTC battery and data preservation time. Table 1-10 Time required for charges of RTC battery Condition Time Power ON (Lights Power LED) About 24 hours Data preservation tome (Full-charged) About a month Satellite A300 Maintenance Manual (960-Q02)
  • Page 72 Table 1-11 AC adapter specifications Parameter Specification With Led DELTA/ LITE-ON DELTA/ LITE-ON DELTA/ LITE-ON Power 120W Input voltage AC 100V/240V Input frequency 50Hz/60Hz Input current ≦ 1.5A Output voltage DC 19V Output current 3.95A 4.74A 6.3A Satellite A300 Maintenance Manual (960-Q02)

  • Page 73: Troubleshooting Procedures

    Chapter 2 Troubleshooting Procedures Satellite A300 Maintenance Manual(960-Q08)
  • Page 74 Satellite A300 Maintenance Manual(960-Q08)
  • Page 75 Keyboard Troubleshooting ..................31 Procedure 1 Diagnostic Test Program Execution Check ......31 Procedure 2 Connector Check and Replacement Check......32 Touch pad Troubleshooting ..................33 Procedure 1 Diagnostic Test Program Execution Check ......33 Procedure 2 Connector Check and Replacement Check......34 Satellite A300 Maintenance Manual(960-Q08)

  • Page 76: Procedure

    Fingerprint Troubleshooting ..................47 Procedure 1 Diagnostic Test Program Execution Check ......47 Procedure 2 Connector Check and Replacement Check......47 2.16 Bluetooth Troubleshooting ..................48 Procedure 1 Diagnostic Test Program Execution Check ......48 Procedure 2 Connector Check and Replacement Check......48 Satellite A300 Maintenance Manual(960-Q08)

  • Page 77: Troubleshooting

    1. Phillips screwdrivers (For replacement procedures) 2. Implements for debugging port check • Toshiba MS-DOS system FD • RS-232C cross cable • Test board with debug port test cable • PC for displaying debug port test result Satellite A300 Maintenance Manual (960-Q08)

  • Page 78: Procedure

    There are following two types of connections in the figure of board and module connection in and after 2.3 Power Supply Troubleshooting. (1) Cable connection is described in the figure as line. (2) Pin connection is described in the figure as arrow. <e.g.> Connection of modem Satellite A300 Maintenance Manual (960-Q08)

  • Page 79: Troubleshooting Flowchart

    Before going through the flowchart steps, verify the following: Ask him or her to enter the password if a password is registered. Verify with the customer that Toshiba Windows is installed on the hard disk. Non- Windows operating systems can cause the computer to malfunction.
  • Page 80 2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) Satellite A300 Maintenance Manual (960-Q08)
  • Page 81 2 Troubleshooting Procedures Figure 2-2 Troubleshooting flowchart (2/2) If the diagnostics program cannot detect an error, the problem may be intermittent. The Test program should be executed several times to isolate the problem. Check the Log Utilities Satellite A300 Maintenance Manual (960-Q08)

  • Page 82: System Test

    13. If an error is detected on the fingerprint test, perform the fingerprint Troubleshooting Procedures in Section 2.16. 14. If an error is detected on the Bluetooth test, perform the Bluetooth Troubleshooting Procedures in Section 2.17. Satellite A300 Maintenance Manual (960-Q08)

  • Page 83: Power Supply Troubleshooting

    The battery level is low while the system power is ON. (even intervals) Blinks orange once The system is driven by only a battery and the battery level (at being switched on) is low. Doesn’t light Any condition other than those above. Satellite A300 Maintenance Manual (960-Q08)
  • Page 84 Check 1 If the DC IN icon blinks orange, go to Procedure 2. Check 2 If the DC IN icon does not light, go to Procedure 3. Check 3 If the battery icon does not light orange, go to Procedure 4. NOTE: Use a supplied AC adapter. Satellite A300 Maintenance Manual (960-Q08)

  • Page 85: Procedure 2 Error Code Check

    Bad Address Mark Error Record Not Found HDC Not Reset Error Drive Not Initialized DMA Boundary Error Bad Sector Bad Track Error ECC Error ECC Recover Enabled HDC Error Seek Error Time Out Error Drive Not Ready Satellite A300 Maintenance Manual (960-Q08)
  • Page 86 Cache Memory Protect Mode Error Caching Error Other Error Multimedia Write Error Invalid Drive Drive Not Ready Other Error NOTE: If error status name is Other Error , please reference the Error Code for error information Satellite A300 Maintenance Manual (960-Q08)

  • Page 87: Procedure 3 Connection Check

    If the battery pack is still not charged, go to Check 5. Check 5 Replace the battery pack with a new one. If the battery pack is still not charged, go to Procedure 5. Satellite A300 Maintenance Manual (960-Q08)

  • Page 88: Procedure 5 Replacement Check

    (When driving with battery pack) Check 1 Battery pack may be faulty. Replace it with a new one. If the problem still occurs, perform Check 2. Check 2 System board may be faulty. Replace it with a new one. Satellite A300 Maintenance Manual (960-Q08)

  • Page 89: System Board Troubleshooting

    Procedure 1 and continue with the other procedures as instructed. The procedures described in this section are: Procedure 1: Message Check Procedure 2: Debugging Port Check Procedure 3: Diagnostic Test Program Execution Check Procedure 4: Replacement Check Satellite A300 Maintenance Manual (960-Q08)

  • Page 90: Procedure 1

    The following error message appears when data stored in RAM under the resume function is lost because the battery has become discharged or the system board is damaged. Go to Procedure 3. WARNING: RESUME FAILURE. PRESS ANY KEY TO CONTINUE. Satellite A300 Maintenance Manual (960-Q08)
  • Page 91 (16) PIC #1 ERROR (17) PIC #2 ERROR (18) KBC ERROR (19) HDC ERROR (20) HDD #0 ERROR (21) HDD #1 ERROR (22) NO FDD ERROR (23) FDC ERROR (24) TIMER INTERRUPT ERROR (25) RTC UPDATE ERROR Satellite A300 Maintenance Manual (960-Q08)

  • Page 92: Debugging Port Check

    Initialize caches to initial POST values Initialize I/O component Initialize the local bus IDE Initialize Power Management Load alternate registers with initial POST values Restore CPU control word during warm boot Initialize PCI Bus Mastering devices Satellite A300 Maintenance Manual (960-Q08)

  • Page 93: Keyboard

    Test for unexpected interrupts Initialize POST display service Display prompt "Press F2 to enter SETUP" Disable CPU cache Test RAM between 512 and 640 KB Test extended memory Test extended memory address lines Jump to UserPatch1 Satellite A300 Maintenance Manual (960-Q08)
  • Page 94 Check for SMART Drive (optional) Shadow option ROMs Set up Power Management Initialize security engine (optional) Enable hardware interrupts Determine number of ATA and SCSI drives Set time of day Check key lock Initialize Typematic rate Erase F2 prompt Satellite A300 Maintenance Manual (960-Q08)
  • Page 95 Initialize POST Error Manager (PEM) Initialize error logging Initialize error display function Initialize system error handler PnPnd dual CMOS (optional) Initialize notebook docking (optional) Initialize notebook docking late Force check (optional) Extended checksum (optional) Unknown interrupt Satellite A300 Maintenance Manual (960-Q08)
  • Page 96 Shadow Boot Block System memory test Initialize interrupt vectors Initialize Run Time Clock Initialize video Initialize System Management Mode 1 Output one beep before boot Boot to Mini DOS Clear Huge Segment Boot to Full DOS Satellite A300 Maintenance Manual (960-Q08)

  • Page 97: Dmi Information

    If an error is detected during these tests, go to Procedure 4. Procedure 4 Replacement Check System board may be faulty. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and replace system board with a new one. Satellite A300 Maintenance Manual (960-Q08)

  • Page 98: Usb Fdd Troubleshooting

    Procedure 2. Detailed operation is given in Chapter 3, Tests and Diagnostics. If the test program cannot be executed on the computer, go to Procedure 3. Satellite A300 Maintenance Manual (960-Q08)

  • Page 99: Diagnostic Test Program Execution Check

    “write enable”. If any other message appears, perform Check 2. Write protected Check 2 Make sure the floppy disk is formatted correctly. If it is, go to Procedure 3. Satellite A300 Maintenance Manual (960-Q08)

  • Page 100: Procedure 3 Connector Check And Replacement Check

    NOTE: When checking the connection, be sure to check it with care for the followings. 1. Cable can not be disconnected from the connector. 2. Cable is connected straight to the connector. 3. Cable is connected all the way seated in the connector. 4. Cable can not be broken. Satellite A300 Maintenance Manual (960-Q08)
  • Page 101 If it does not work properly when connected to CN12, CN19, CN20 or all ports, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the steps in Chapter 4, Replacement Procedures. Satellite A300 Maintenance Manual (960-Q08)

  • Page 102: Hdd Troubleshooting

    User’s Manual. Procedure 1 Partition Check Insert the Toshiba MS-DOS system disk and start the computer. Perform the following checks: Input C: and press Enter. If you cannot change to drive C, go to Check 2. If you Check 1 can change to drive C, go to Procedure 2.

  • Page 103: Message Check

    2.5” HDD(s) and the connector(s) of system board may be defective (Refer to the steps described in Chapter 4, Replacement Procedures for disassembling.). Insert HDD(s) to the connector(s) firmly. If it is (or they are) firmly connected, go to Procedure 3. Satellite A300 Maintenance Manual (960-Q08)

  • Page 104: Format Check

    Using the Diagnostic Disk, format 2.5” HDD with a format option (physical format). If HDD is formatted, set the 2.5” HDD partition using MS-DOS FDISK command. If you cannot format 2.5” HDD using the Tests and Diagnostic program, go to Procedure 4. Satellite A300 Maintenance Manual (960-Q08)

  • Page 105: Diagnostic Test Program Execution Check

    HDD - ECC RECOVER ENABLE HDD - DRIVE NOT READY HDD - WRITE FAULT HDD - STATUS ERROR HDD - BAD SECTOR HDD - ACCESS TIME ERROR HDD - NO HDD HDD - DMA CRC ERROR Satellite A300 Maintenance Manual (960-Q08)

  • Page 106: Procedure 5 Connector Check And Replacement Check

    Chapter 4, Replacement Procedures and check the operation. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Satellite A300 Maintenance Manual (960-Q08)

  • Page 107: Keyboard Troubleshooting

    ONE TEST) in the Diagnostic Program. Refer to Chapter 3, Tests and Diagnostics, for more information on how to perform the test program. If an error occurs, go to Procedure 2. If an error does not occur, keyboard is functioning properly. Satellite A300 Maintenance Manual (960-Q08)

  • Page 108: Procedure 2 Connector Check And Replacement Check

    Keyboard may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Satellite A300 Maintenance Manual (960-Q08)

  • Page 109: Touch Pad Troubleshooting

    Execute the Touch pad test (ONLY ONE TEST) in the Diagnostic Program. Refer to Chapter 3, Tests and Diagnostics, for more information on how to perform the test program. If an error occurs, go to Procedure 2. If an error does not occur, touch pad is functioning properly. Satellite A300 Maintenance Manual (960-Q08)

  • Page 110: Procedure 2 Connector Check And Replacement Check

    Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures Satellite A300 Maintenance Manual (960-Q08)

  • Page 111: Display Troubleshooting

    Insert the Diagnostics disk in the USB FDD, turn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics for details. If an error is detected, go to Procedure 3. Satellite A300 Maintenance Manual (960-Q08)

  • Page 112: Connector And Cable Check

    HV cable. Their cables may be disconnected from system board or FL inverter board. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures. If the connection is loose, reconnect firmly and restart the computer. If the problem still occurs, go to Procedure 4. Satellite A300 Maintenance Manual (960-Q08)

  • Page 113: Procedure 4 Replacement Check

    Chapter 4, Replacement Procedure and test the display again. If the problem still occurs, perform Check 5. Check 5 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedure. Satellite A300 Maintenance Manual (960-Q08)

  • Page 114: Optical Disk Drive Troubleshooting

    Optical disk drive may be faulty. Replace it with a new one following the steps in Chapter 4. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with new one following the instructions in Chapter 4. Satellite A300 Maintenance Manual (960-Q08)

  • Page 115: Modem Troubleshooting

    Disassemble the computer following the steps described in Chapter 4 and perform the following checks: Check 1 Make sure the following connections are firmly connected. If any connector is disconnected, connect it firmly and return to Procedure 1. If the problem still occurs, perform Check 2. Satellite A300 Maintenance Manual (960-Q08)
  • Page 116 Cable between MDC and system board may be faulty. Replace it with a new one following the instructions in Chapter 4. If the problem still occurs, perform Check Check 6 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite A300 Maintenance Manual (960-Q08)

  • Page 117: Lan Troubleshooting

    LAN cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite A300 Maintenance Manual (960-Q08)

  • Page 118: Wireless Lan Troubleshooting

    LAN. You will need a second computer that can communicate by wireless LAN. Perform the test following the instructions described in Chapter 3. If the computer passes the test, the function is correctly working. If the computer does not pass the test, perform Procedure 2. Satellite A300 Maintenance Manual (960-Q08)

  • Page 119: Antennas' Connection Check

    Make sure that wireless LAN antenna cables (black and white) are firmly connected to the connectors on Wireless LAN card. If wireless LAN antenna cables are not connected properly, connect them firmly and perform Procedure 1. If the problem still occurs, go to the procedure 3. Satellite A300 Maintenance Manual (960-Q08)

  • Page 120: Procedure 3 Replacement Check

    Wireless LAN card may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check3 System board may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. Satellite A300 Maintenance Manual (960-Q08)

  • Page 121: Sound Troubleshooting

    Connector Check The connection of sound system is shown in the following figure. As the connection may be defective, disassemble the PC and check each connection. If the problem still occurs, go to Procedure 2. Satellite A300 Maintenance Manual (960-Q08)
  • Page 122 Chapter 4. If the problem still occurs, perform Check 6. Check 6 Audio board/System board may be faulty. Replace it with a new one following the instructions in Chapter 4. Satellite A300 Maintenance Manual (960-Q08)

  • Page 123: Procedure 1 Diagnostic Test Program Execution Check

    Fingerprint may be faulty. Replace it with a new one following the steps in Chapter 4. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite A300 Maintenance Manual (960-Q08)

  • Page 124: Bluetooth Troubleshooting

    Bluetooth may be faulty. Replace it with a new one following the steps in Chapter 4. If the problem still occurs, perform Check 4. Check 4 System board may be faulty. Replace it with a new one following the instruction in Chapter 4. Satellite A300 Maintenance Manual (960-Q08)

  • Page 125: Replacement Procedures

    Chapter 4 Replacement Procedures Satellite A300 Maintenance Manual(960-Q08)
  • Page 126 Replacement Procedures Satellite A300 Maintenance Manual(960-Q08)
  • Page 127 Optical disk drive..................... 4-23 Display assembly ..................... 4-24 4.10 Cover assembly......................4-29 4.11 Touch pad......................... 4-33 4.12 USB board ....................... 4-34 4.13 System board......................4-36 4.14 CPU..........................4-39 4.15 LCD unit / FL inverter ..................... 4-42 4.16 Grease/Thermal pad………………………………………………………………..4-48 Satellite A300 Maintenance Manual(960-Q08) 4-iii...

  • Page 128: Audio Board

    Figure 4-27 Removing the CPU heat sink ................4-40 Figure 4-28 Removing the CPU ..................4-40 Figure 4-29 Applying silicon grease..................4-41 Figure 4-30 Removing the display mask ................4-43 Figure 4-31 Removing the FL inverter ................4-44 Satellite A300 Maintenance Manual(960-Q08)
  • Page 129 Figure 4-34 Thermal pad North Bridge ................4-51 Figure 4-35 Apply silicon grease for North Bridge ............. 4-52 Figure 4-36 Thermal pad & VRAM position ..............4-52 Figure 4-37 Thermal pad position..................4-53 Figure 4-38 Thermal pad & VRAM position ..............4-54 Satellite A300 Maintenance Manual(960-Q08)

  • Page 130: Overview

    The tilt stand, if it is installed, can be removed without any other FRUs removed. • Chart Notation The chart shows the case for the following example: • Removing a MDC All FRUs down to the “4.2 Battery pack” to “4.10 Cover assembly” above a SD board/Microphone/MDC must be removed. Satellite A300 Maintenance Manual(960-Q08)

  • Page 131: Safety Precautions

    DANGER: 1. In the case of the battery, always use authentic parts or equivalent parts approved by Toshiba. Other batteries may have different specifications that are incompatible with the computer and may result in fire or explosion.

  • Page 132: Before You Begin

    Screw sizes are noted in the text and figures. 9. As all parts have sharp edges and corners, take care not to cut yourself. 10. After replacing an FRU, check that the computer and replaced part operate correctly. Satellite A300 Maintenance Manual(960-Q08)

  • Page 133: Disassembly Procedure

    Normal pin connectors are used for all other cables. Simply pull out or push in these connectors to disconnect or reconnect. Pressure plate connector Spring connector Satellite A300 Maintenance Manual(960-Q08) 4-4...

  • Page 134: Assembly Procedure

    One Philips screwdriver with type 1 bit (for screws other than above) • Tweezers (for lifting screws) • ESD mats (lay on work table or floor) • An ESD wrist strap and heel grounder • Anti-static carpet or flooring Satellite A300 Maintenance Manual(960-Q08)

  • Page 135: Screw Tightening Torque

    Special length screw: Blue G r ip a r e a “Special length screw” means screws whose length is indicated in an integral number to the first decimal places such as 2.5 mm, 2.8 mm and so on. Satellite A300 Maintenance Manual(960-Q08) 4-6...

  • Page 136: Screw Notation

    Screw shape + Screw length (mm) Screw shape B: Bind screw F: Thin head screw S: Super thin head screw T: Tapping screw U: Other screws (Unique screws: pan head, stud, etc.) Example: B6 … 6mm bind screw Satellite A300 Maintenance Manual(960-Q08)

  • Page 137: Battery Pack

    4. Slide and hold the battery release latch (1) to free the battery pack after moving the battery release lock (2) into it unlock position – pick the battery pack out of the computer from fillister. Latch 1 Fillister Latch 2 Figure 4-1-1 Removing the battery pack Satellite A300 Maintenance Manual(960-Q08) 4-8...
  • Page 138 Dispose always the used battery pack in accordance with the laws and ordinances of your local authority. Use only the batteries approved by Toshiba. NOTE: Check visually the battery terminals and clean off any dirt with a dry cloth.
  • Page 139 Replacement Procedures Satellite A300 Maintenance Manual(960-Q08) 4-10...

  • Page 140: Dummy New Card

    NOTE: If a Dummy card is not inserted all the way, the eject button may not pop out. Be sure to push a Dummy card firmly and press the eject button again. Push Figure 4-2-1 Removing a Dummy card Satellite A300 Maintenance Manual(960-Q08) 4-11...
  • Page 141 The following describes the procedure for inserting a Dummy card (See Figure 4-2-2). 1. Make sure the eject button does not stick out. 2. Insert a Dummy card and press it until it is securely connected. Figure 4-3-2 Insert a Dummy card Satellite A300 Maintenance Manual(960-Q08) 4-12...

  • Page 142: Hdd

    2. Remove the following screws securing a HDD slot cover and remove a HDD slot cover. • M2.5×3.0B FLAT BIND screw 3. Remove the following screws securing the HDD assembly. • M2.5×3.0B FLAT BIND screw 4. Disconnect the HDD assembly from the connector on the system board. Satellite A300 Maintenance Manual(960-Q08) 4-13...
  • Page 143 Replacement Procedures CAUTION: When a HDD is installed, they are installed in the position as the following figure. Figure 4-4 Removing the HDD assembly Satellite A300 Maintenance Manual(960-Q08) 4-14...
  • Page 144 Replacement Procedures 5. Remove the following screws securing the HDD holder and remove the HDD holder. • M3.0×3.5B FLAT BIND screw Figure 4-4 Removing a HDD Satellite A300 Maintenance Manual(960-Q08) 4-15...
  • Page 145 HDD holder. 2. Insert the HDD assembly into the HDD slot and connect it carefully on the system board. 3. Secure the HDD assembly with the following screw. • M2.5×3.0B FLAT BIND screw Satellite A300 Maintenance Manual(960-Q08) 4-16...

  • Page 146: Wireless Lan Card

    • Remove the screw: 2.0 x 3.0 2. Open the left and right latches holding a wireless LAN card and remove a wireless LAN card from the connector on the system board. Figure 4-5 Removing a wireless LAN card Satellite A300 Maintenance Manual(960-Q08) 4-17...
  • Page 147 LAN card and lock the secure screws. 2. Connect the wireless LAN antenna cables to the terminals on a wireless LAN card. 3. Install the wireless LAN card cover and secure it with the following screw. Satellite A300 Maintenance Manual(960-Q08) 4-18...

  • Page 148: Memory Module

    (See Figure 4-6). 1. Loose the screw securing the memory slot cover. 2. Remove the memory slot cover. 3. Open the left and right latches and remove a memory module. Figure 4-6 Removing a memory module Satellite A300 Maintenance Manual(960-Q08) 4-19...
  • Page 149 3. When the power of the computer is turned on, the computer checks automatically the memory size. Confirm that the new memory is detected correctly. 4. If the memory is not detected, check that it is connected correctly. Socket1 Socket2 Figure 4-7 Insert a memory module Satellite A300 Maintenance Manual(960-Q08) 4-20...

  • Page 150: Keyboard

    3. Upside down the computer. 4. Remove KBD holder. Remove the KB holder screw: M2.5 x 3B 5. Insert your finger into the keyboard slot and keyboard. Then lift up the keyboard to remove it. 6. Disconnect keyboard cable. Satellite A300 Maintenance Manual(960-Q08) 4-21...
  • Page 151 Replacement Procedures Figure 4-8 Removing screws for KB Holder Figure 4-9 Removing the keyboard/KB Holder Satellite A300 Maintenance Manual(960-Q08) 4-22...
  • Page 152 2. Slide and set the speaker cover assembly and secure it with the following screw. • M2.5×3.0B FLAT BIND screw • M2.0x 1.8B FLAT BIND screw 3. Install the keyboard brace by pressing it from the topside. Satellite A300 Maintenance Manual(960-Q08) 4-23...

  • Page 153: Optical Disk Drive

    1. Remove Keyboard and next remove the following screws securing an optical disk drive. • M2.5×1.0B FLAT BIND screw 2. Disconnect an optical disk drive toward the arrow direction from the connector on the system board. M2.0×3.0B FLAT BIND screw Figure 4-11 Removing an optical disk drive Satellite A300 Maintenance Manual(960-Q08) 4-24...
  • Page 154 • M2.0×3.0 Flat BIND screw 2. Insert an optical disk drive assembly into the slot and connect it to the connector on the system board. 3. Secure the ODD drive with the following screw. M2.5x3.0B Flat BIND screw Satellite A300 Maintenance Manual(960-Q08) 4-25...

  • Page 155: Display Assembly

    2. Open the MINIPCI Door and remove the wireless LAN screws and antenna connector. M2.0x3.0 FLAT BIND (Locktight) Figure 4-13 Removing the screws (securing display assembly) 3. Open the display and removing the k/b holder and keyboard. (please refer figure 4- 8,figure4-9). 4. Disassembly TOP ASSY 4-24 Satellite A300 Maintenance Manual(960-Q08)
  • Page 156 Replacement Procedures Figure 4-14 Removing the screws (from bottom side) Figure 4-15 Removing the screws (from top side) 4-25 Satellite A300 Maintenance Manual(960-Q08)
  • Page 157 Figure 4-16 Removing the Wireless Antenna and LCD cable 6. Opening the display to 180 degree, and remove the hinge screw. ‧ M2.5×5.0 FLAT BIND screw (Locktight) Wireless LAN antenna cable Figure 4-17 Removing the hinge screw 4-26 Satellite A300 Maintenance Manual(960-Q08)
  • Page 158 5. Pulling out the pole of hinge from the hole of hinge assembly, remove the display assembly from the base assembly. Display assembly Base assembly Figure 4-18 Removing the LCD harness and remove display assembly 4-27 Satellite A300 Maintenance Manual(960-Q08)
  • Page 159 5. Pass the cables to the back of computer through the slot. 6. Arrange the wireless LAN antenna along the guide and contact with the connector. 7. Install the LAN board and cover ASSY of the system. 4-28 Satellite A300 Maintenance Manual(960-Q08)

  • Page 160: Cover Assembly

    • M2.0×8.0 FLAT BIND screw Back • M2.5×4.5 FLAT BIND screw Back Figure 4-19 removing the screws (back) 3. Disconnect the touch pad flat cable/Fingerprint cable/Bluetooth Cable from the connector on the system board. 4-29 Satellite A300 Maintenance Manual(960-Q08)
  • Page 161 Replacement Procedures Figure 4-20 Disconnect the touch pad flat cable/Fingerprint cable/Bluetooth Cable 4-30 Satellite A300 Maintenance Manual(960-Q08)
  • Page 162 4. Remove the following screws securing the cover assembly from the front of computer. Pull up and remove the cover assembly from the base assembly. M2.0×5.0 FLAT BIND screw Front Figure 4-21 Removing the screws (front) and cover assy 4-31 Satellite A300 Maintenance Manual(960-Q08)
  • Page 163 3. Secure the cover assembly with the following screws from the back and bottom of computer. • M2.0×8.0 FLAT BIND screw Back • M2.5×6.5 FLAT BIND screw Back 4. Disassemble the cable from cable-drain while taking the antenna cable to PCB hole. 4-32 Satellite A300 Maintenance Manual(960-Q08)

  • Page 164: Touch Pad

    2. Remove the following screws securing the touch pad plate. • M2.5×3.0B SUPER THIN HEAD screw 3. Remove the touch pad board and touch pad plate. 4. Peel off and remove the touch pad from the cover assembly. 4-33 Satellite A300 Maintenance Manual(960-Q08)
  • Page 165 SUPER THIN HEAD screw 4. Stick the insulator on the touch pad plate. 5. Connect the touch pad flat cable to the connector on the touch pad and stick the glass tape on the connector. 4-34 Satellite A300 Maintenance Manual(960-Q08)

  • Page 166: Usb Board

    Installing the USB board 1. Insert the USB board into base case 2. Fix the below screws M2.5x6.5 FLAT BIND screw NOTE: Be careful not to catch the cables between cover assembly and base assembly. 4-35 Satellite A300 Maintenance Manual(960-Q08)

  • Page 167: System Board

    1. Disconnect the power from the system board (See Figure 4-25) Figure 4-25 Disconnect the cable 2. Disconnect the speaker cable, USB cable from the connector on the system board. 3. Remove the following screws securing the system board and remove the system Satellite A300 Maintenance Manual(960-Q08)
  • Page 168 Replacement Procedures board. (See Figure 4-26) • M2.5×6.5 BIND screw Figure 4-26 Removing the system board Satellite A300 Maintenance Manual(960-Q08)
  • Page 169 1. Secure the system board with the following screws. • M2.5×6.5 BIND screw 2. Connect the speaker cable, USB cable to the connector on the system board. 3. Connect the power cable to the connector on the system board Satellite A300 Maintenance Manual(960-Q08)

  • Page 170: Cpu

    NOTE: When removing the heat sink holder, be sure to remove the screws in the reverse order of the number marked on the holder. 3. Remove the CPU heat sink. Figure 4-27 Removing the CPU heat sink Satellite A300 Maintenance Manual(960-Q08)
  • Page 171 5. Please apply 0.1cc silicon grease (Shinetsu 7762) or A000018440 (XY0GFCM1000) GFC-M1 for each repair NOTE: Apply the silicon grease enough to cover the chip surface using the special applicator. Thermal pad is fixed for each one, no need special applicator. Satellite A300 Maintenance Manual(960-Q08)
  • Page 172 7. Connect the Heat sink cable to the connector on the system board NOTE: When securing the heat sink holder, be sure to secure the screws in the order of the number marked on the holder. Satellite A300 Maintenance Manual(960-Q08)
  • Page 173 1. Remove the following screws securing the display mask M2.5×5.0 BIND screw X6 2. Insert your finger between the edge of the display mask and the LCD, and remove the display mask while releasing the latches of display mask. Satellite A300 Maintenance Manual(960-Q08)
  • Page 174 Replacement Procedures Satellite A300 Maintenance Manual(960-Q08)
  • Page 175 Replacement Procedures Satellite A300 Maintenance Manual(960-Q08)
  • Page 176 Replacement Procedures Satellite A300 Maintenance Manual(960-Q08)
  • Page 177 4. Disconnect the LCD harnesses from the connectors CN1 on the FL inverter. 5. Disconnect the HV harnesses from the connectors CN2 on the FL inverter. 6. Remove the FL inverter while peeling off the double-sided tape. Satellite A300 Maintenance Manual(960-Q08)

  • Page 178: Lcd Unit / Fl Inverter

    Replacement Procedures Insulator LCD harness FL inverter Double-sided tape HV harness Figure 4-31 Removing the FL inverter Satellite A300 Maintenance Manual(960-Q08)
  • Page 179 8. With the bottom edge of the LCD unit on the display cover, lift only the top edge of the LCD unit. After peeling off the CONDUTIVE tape, disconnect the LCD harness from the connector on the back of the LCD. 9. Remove the LCD unit. Figure 4-32 Removing the LCD unit Satellite A300 Maintenance Manual(960-Q08)
  • Page 180 Replacement Procedures 10. Remove the following screws securing the LCD support (LCD unit side) and remove the LCD supports from the LCD unit. • M2.0x2.5 BINK screw Figure 4-33 Removing the LCD supports Satellite A300 Maintenance Manual(960-Q08)
  • Page 181 8. Secure the display mask with following screws M2.5×5.0 BIND screw x6 9. Cover screws with Screw rubber cover x6 NOTE: When installing the display mask, make sure there is no gap between the display mask and the display cover. Satellite A300 Maintenance Manual(960-Q08)
  • Page 182 Replacement Procedures Application for Grease (Denka FCR-AS)/Thermal pad on North 4.16 Bridge, VGA,V-RAM I. For Satellite A300, Satellite Pro A300, EQUIUM A300, SATEGO A300(INT without VGA board) use Thermal pad on North Bridge TSB PN RW PN Used on A000032180 JXBL5016010 N-BRIDGE THERMAL PAD BL5(JXBL5016,3A)
  • Page 183 A000032230 JXBL5021010 VRAM4 THERMAL PAD BL5(JXBL5021,REV3A) Figure 4-36 Thermal pad & VRAM position III. For Satellite A300D, Satellite Pro A300D, EQUIUM A300D, SATEGO A300D (AMD without VGA board) use the thermal pad only on North Bridge. Satellite A300 Maintenance Manual(960-Q08)
  • Page 184 DIS NB PAD FSL-BS BD3A(JXBD3028,3A) JXBD3029010 A000037560 DIS VGA PAD 50H BD3A(JXBD3029,3A) JXBD3030010 A000037570 DIS VRAM PAD1 T-FLEX340BD3A(JXBD3030,3A) JXBD3031010 A000037580 DIS VRAM PAD2 T-FLEX340BD3A(JXBD3031,3A) JXBD3032010 A000037590 DIS VRAM PAD3 T-FLEX340BD3A(JXBD3032,3A) JXBD3033010 A000037600 DIS VRAM PAD4 T-FLEX340BD3A(JXBD3033,3A) Satellite A300 Maintenance Manual(960-Q08)
  • Page 185 Figure 4-38 Thermal pad & VRAM position NOTE: When applying for grease on North Bridge, one syringe*1cc can cover about six repairs. Thermal pad is fixed for each one, no need special applicator and can re-use. Satellite A300 Maintenance Manual(960-Q08)
  • Page 186 Appendices Satellite A300 Maintenance Manual (960-Q08)
  • Page 187 Satellite A300 Maintenance Manual (960-Q08)

  • Page 188: Fingerprint Board

    C.11 CN11 AUDIO BOARD USB Connector............7 C.12 CN12 BUTTON BOARD Connector .............. 7 C.13 CN13 Finger Print Board Connector ............... 8 C.14 CN14 PCMCIA Connector ................8 C.15 CN15 New Card Connector ................10 Satellite A300 Maintenance Manual (960-Q08)

  • Page 189: Usb Board

    Appendix E Keyboard Layout ..................E-1 United States (US) Keyboard.................E-1 United Kingdom (UK) Keyboard ..............E-1 Arabia (AR) Keyboard .................E-2 Belgium (BB) Keyboard................E-2 Czech (CZ) Keyboard..................E-3 German (GR) Keyboard ................E-3 Danish (DK) Keyboard..................E-4 Spanish (SP) Keyboard..................E-4 French (FR) Keyboard.................E-5 Satellite A300 Maintenance Manual (960-Q08)
  • Page 190 E 19 Japanese (JP) Keyboard................E-10 E 20 Swiss (SW) Keyboard ..................E-10 E 21 Hebrew Keyboard..................E-11 E 22 Greek Keyboard....................E-11 E 23 Slovak (SK) Keyboard..................E-12 E24 TaiWan (TW) Keyboard..................E-12 E 25 Thailand (TH) Keyboard.................E-13 E 26 Yugosla (YS) Keyboard..................E-13 Satellite A300 Maintenance Manual (960-Q08)
  • Page 191 Appendix F Wiring Diagrams..................F-1 RGB Monitor ID Wraparound Connector ............ F-1 LAN Loopbak Connector ................F-1 Appendix G BIOS Rewrite Procedures ................G-1 Appendix H EC/KBC Rewrite Procedures ..............H-1 Appendix I Reliability.......................I-1 Satellite A300 Maintenance Manual (960-Q08)

  • Page 192: Appendix A Handling The Lcd Module

    LCD cover before securing the module with screws. Do not force the module into place, because stress can affect its performance. Also, the panel’s polarized surface is easily scarred, so be careful when handling it. Satellite A300 Maintenance Manual (960-Q08)
  • Page 193 Do not apply cleanser directly to the panel. 4. If water or other liquid is left on the panel’s surface for a long period, it can change the screen’s tint or stain it. Be sure to quickly wipe off any liquid. Satellite A300 Maintenance Manual (960-Q08)
  • Page 194 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge. Be sure to wear a wrist or ankle ground when handling the module. Satellite A300 Maintenance Manual (960-Q08)
  • Page 195 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. Satellite A300 Maintenance Manual (960-Q08)
  • Page 196 Handling the LCD Module 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization. Satellite A300 Maintenance Manual (960-Q08)
  • Page 197 Handling the LCD Module Satellite A300 Maintenance Manual (960-Q08)

  • Page 198: System Board

    Appendix B Appendix B Board Layout B.1 System Board Figure B-1 System board layout (front) Satellite A300 Maintenance Manual (960-Q08)
  • Page 199 Board Layout Figure B-2 System board layout (Back) Satellite A300 Maintenance Manual(960-Q08)
  • Page 200 New Card Connector (13) CN13 Blue Tooth Connector (14) Clock generator (15) Card Reader /1394 (16) CN16 CRT Connector (17) CN23 HDMI Connector (18) CN18 Battery Connector (19) LAN_Marvell_8040/8055 (20) South Bridge (21) CN21 DDR2 Connector Satellite A300 Maintenance Manual(960-Q08)
  • Page 201 Board Layout (22) CN22 DDR2 Connector (23) North Bridge (24) CN24 ODD Connector (25) CN25 VGA Connector (26) CN26 LAN Connector (27) (28) CN31 SATA HDD Connector (29) CN32 USB Connector (30) CN33 Mini Card Connector Satellite A300 Maintenance Manual(960-Q08)
  • Page 202 <Front layout> Figure B-2-1 Touch Pad board layout (Front) Table B-2-1 Touch Pad board connectors Location Function (01) Mouse Button Left key (02) Mouse Button Left key (03) Mouse Button Right key (04) Mouse Button Right key Satellite A300 Maintenance Manual(960-Q08)
  • Page 203 Board Layout <Back layout> Figure B-2-2 Touch Pad board layout (Back) Table B-2-2 Touch Pad board connectors Location Function (01) TP Board to M/B I C signal connector (02) TP Board toM/B LED Connector Satellite A300 Maintenance Manual(960-Q08)
  • Page 204 Board Layout B.3 Finger Print Board <Front layout> Figure B-3-1 Finger Print Board layout (Front) Table B-3-1 Finger Print Board connectors Location Function (01) Finger Printer IC <Back layout> Figure B-3-2 Finger Print Board layout (Back) Satellite A300 Maintenance Manual(960-Q08)
  • Page 205 Board Layout Table B-3-2 Finger Print Board connectors Location Function (01) Finger Print Board to TP Board connector (02) Finger Print Board to TP Board connector Satellite A300 Maintenance Manual(960-Q08)
  • Page 206 PIN No. Signal name INVCCO LCDVCC INVCCO LCDVCC INVCCO LCD-EDIDDATA LCD_EDIDCLK CCD _POWER LVDS_VADG MIC_GND MIC_DATA USBP2+_C DISPON USBP2-_C TXLCLKOUT+ TXUCLKOUT+ TXLCLKOUT- TXUCLKOUT- TXLOUT0+ TXUOUT0+ TXLOUT0- TXUOUT0- TXLOUT1+ TXUOUT1+ TXLOUT1- TXUOUT1- TXLOUT2+ TXUOUT2+ TXLOUT2- TXUOUT2- Satellite A300 Maintenance Manual (960-Q08)
  • Page 207 MIC_GND MIC_DATA_LCD CN3 Button Board Connector PIN No. Signal name PIN No. Signal name +3VPCU +5VPCU KEY_INT 3ND_MBDATA 3ND_MBCLK CN4 Keyboard Side Connectors PIN No. Signal name PIN No. Signal name +3VPCU LOW_DET FN0# FN1# Satellite A300 Maintenance Manual (960-Q08)
  • Page 208 CN5 Power Board Connectors PIN No. Signal name PIN No. Signal name +5VPCU NBSWON# PWRLED# CN6 CN7 Keyboard Connectors PIN No. Signal name PIN No. Signal name K_LED_P MY16 MX17 K_LED_P MY14 MY7_K MY3_K MY10 MY11 MY12 MY15 Satellite A300 Maintenance Manual (960-Q08)
  • Page 209 PIN No. Signal name +5V TP +5VPCU TPDATA_1 TPCLK_1 TP LED ON C BATLED1# BATLED0# PWRLED# SUSLED-EC# SATA LED# ACIN TP-XD-LED CN9 Felica Connectors PIN No. Signal name PIN No. Signal name USBP5+ USBP5- WCS_CLK Satellite A300 Maintenance Manual (960-Q08)
  • Page 210 FINGER_POWER --- USBP4- USBP4+ CN11 USB Board Connectors PIN No. Signal name PIN No. Signal name +5VPCU USBOC#1 USBP1+ USBP1- USBP0+ USBP0- USB-EN#1 +5PCU CN12 New Card Connectors PIN No. Signal name PIN No. Signal name Satellite A300 Maintenance Manual (960-Q08)
  • Page 211 NEW SMCLK NEW SMDATA +NEW_1.5V +NEW_1.5V PCIE_WAKE# +NEW_3VAUX PERST# +NEW_3V +NEW_3V NEW_CLKREQ#_RR CPPE#_ CLK_PCIE_NEW# CLK_PCIE_NEW PCIE_RXP4 PCIE_RXP4 PCIE_TXN4 PCIE_TXN4 CN13Blue Tooth Connectors PIN No. Signal name PIN No. Signal name USBP5+ USBP5- WCS_CLK BT_RESET WCS_DAT USB_DETACH Satellite A300 Maintenance Manual (960-Q08)
  • Page 212 CN15 INT SPEAKER Connectors PIN No. Signal name PIN No. Signal name INSPKL-N INSPKL+N INSPKL-N INSPKL+N CN16 CRT Connectors PIN No. Signal name PIN No. Signal name CRT_R1 CRT_G1 CRT_B1 5V_CRT2 CRT_SENSE# CRTDDAT CRTHSYNC CRTVSYNC CRTDCLK Satellite A300 Maintenance Manual (960-Q08)
  • Page 213 FANSIG CN18 Battery Connectors PIN No. Signal name PIN No. Signal name MBAT+ MBAT+ TEMP_MBAT MBDATA MBCLK CN19 MINI PCI-E Card WLAN Connectors PIN No. Signal name PIN No. Signal name WLAN_WAKE# WCS_DATR WCS_CLKR +1.5V Satellite A300 Maintenance Manual (960-Q08)
  • Page 214 Pin Assignment LAD0_PCIE LAD1_PCIE CLK_PCIEI_MINI#_ LAD2_PCIE CLK_PCIEI_MINI LAD3_PCIE LFRAME#_PCIE RF_EN_WLAN PLTRST# PCIE_RXN1 +3V_S5 PCIE_RXP1 +1.5V WL_SMCLK PCIE_TXN1 WL_SMDATA PCIE_TXP1 USBP3-_B USBP3+_B LED_WLAN# CL_CLK1_MIN LED_WPAN# CL DATA1 MIN +1.5V CL_RST#1_MIN SERIRQ_WLAN Satellite A300 Maintenance Manual (960-Q08)
  • Page 215 PIN No. Signal name TV-LUMA TV-CHROMA CN21 DDR2 Connectors PIN No. Signal name PIN No. Signal name SMDDR_VREF_DIMM M_B_DQ4 M_B_DQ5 M_B_DQ0 M_B_DQ6 M_B_DM0 M_B_DQS#0 M_B_DQS0 M_B_DQ7 M_B_DQ1 M_B_DQ3 M_B_DQ2 M_B_DQ13 M_B_DQ12 M_B_DQ9 M_B_DQ8 M_B_DM1 M_B_DQS#1 M_CLK_DDR0 Satellite A300 Maintenance Manual (960-Q08)
  • Page 216 Pin Assignment M_B_DQS1 M_CLK_DDR#0 M_A_DQ14 M_A_DQ10 M_A_DQ11 M_A_DQ15 M_A_DQ16 M_A_DQ20 M_A_DQ21 M_A_DQ17 M_A_DQS#2 PM_EXTTS#0 M_A_DQS2 M_B_DM2 M_A_DQ23 M_A_DQ18 M_A_DQ19 M_A_DQ22 M_A_DQ28 M_A_DQ29 M_A_DQ25 M_A_DQ24 M_A_DM3 M_A_DQS#3 M_A_DQS3 M_A_DQ26 M_A_DQ30 M_A_DQ27 M_A_DQ31 Satellite A300 Maintenance Manual (960-Q08)
  • Page 217 M_A_A12 M_A_A11 M_A_A9 M_A_A7 M_A_A8 M_A_A6 +1.8VSUS +1.8VSUS M_A_A5 M_A_A4 M_A_A3 M_A_A2 M_A_A1 M_A_A0 +1.8VSUS +1.8VSUS M_A_A10 M_A_BS1 M_A_BS#0 M_A_RAS# M_A_WE# M_CS#0 +1.8VSUS +1.8VSUS M_A_CAS# M_ODT0 M_CS#1 M_A_A13 +1.8VSUS +1.8VSUS M_ODT1 M_A_DQ36 M_A_DQ32 M_A_DQ33 M_A_DQ37 Satellite A300 Maintenance Manual (960-Q08)
  • Page 218 Pin Assignment M_A_DQS#4 M_A_DM4 M_A_DQS4 M_A_DQ35 M_A_DQ39 M_A_DQ38 M_A_DQ34 M_A_DQ44 M_A_DQ40 M_A_DQ45 M_A_DQ41 M_A_DQS#5 M_A_DM5 M_A_DQS5 M_A_DQ46 M_A_DQ43 M_A_DQ42 M_A_DQ47 M_A_DQ48 M_A_DQ49 M_A_DQ53 M_A_DQ52 M_CLK_DDR1 M_CLK_DDR#1 M_A_DQS#6 M_A_DQS6 M_A_DM6 M_A_DQ50 M_A_DQ55 Satellite A300 Maintenance Manual (960-Q08)
  • Page 219 Pin Assignment M_A_DQ51 M_A_DQ54 M_A_DQ56 M_A_DQ61 M_A_DQ60 M_A_DQ57 M_A_DM7 M_A_DQS#7 M_A_DQS7 M_A_DQ62 M_A_DQ63 M_A_DQ58 M_A_DQ59 GGDAT_SMB GGCLK_SMB CN22 DDR2 Connectors Signal name Signal name SMDDR_VREF_DIMM M_B_DQ0 M_B_DQ5 M_B_DQ1 M_B_DQ4 M_B_DM0 M_B_DQS#0 M_B_DQS0 M_B_DQ7 Satellite A300 Maintenance Manual (960-Q08)
  • Page 220 Pin Assignment M_B_DQ6 M_B_DQ2 M_B_DQ3 M_B_DQ12 M_B_DQ13 M_B_DQ8 M_B_DQ9 M_B_DM1 M_B_DQS#1 M_CLK_DDR3 M_B_DQS1 M_CLK_DDR#3 M_B_DQ14 M_B_DQ11 M_B_DQ15 M_B_DQ10 M_B_DQ20 M_B_DQ21 M_B_DQ17 M_B_DQ16 M_B_DQS#2 PM_EXTTS#1 M_B_DQS2 M_B_DM2 M_B_DQ23 M_B_DQ18 M_B_DQ22 M_B_DQ19 M_B_DQ28 M_B_DQ24 M_B_DQ25 M_B_DQ29 Satellite A300 Maintenance Manual (960-Q08)
  • Page 221 M_B_DQ27 M_CKE3 M_CKE4 +1.8VSUS +1.8VSUS M_B_BS#2 M_B_A14 +1.8VSUS +1.8VSUS M_B_A12 M_B_A11 M_B_A9 M_B_A7 M_B_A8 M_B_A6 +1.8VSUS +1.8VSUS M_B_A5 M_B_A4 M_B_A3 M_B_A2 M_B_A1 M_B_A0 +1.8VSUS +1.8VSUS M_B_A10 M_B_BS#1 M_B_BS#0 M_B_RAS# M_B_WE# M_CS#2 +1.8VSUS +1.8VSUS M_B_CAS# M_ODT2 Satellite A300 Maintenance Manual (960-Q08)
  • Page 222 Pin Assignment M_CS#3 M_B_A13 +1.8VSUS +1.8VSUS M_ODT3 M_B_DQ32 M_B_DQ37 M_B_DQ36 M_B_DQ38 M_B_DQS#4 M_B_DM4 M_B_DQS4 M_B_DQ39 M_B_DQ35 M_B_DQ33 M_B_DQ34 M_B_DQ44 M_B_DQ41 M_B_DQ45 M_B_DQ40 M_B_DQS#5 M_B_DM5 M_B_DQS5 M_B_DQ43 M_B_DQ42 M_B_DQ46 M_B_DQ47 M_B_DQ52 M_B_DQ53 M_B_DQ49 M_B_DQ48 M_CLK_DDR4 Satellite A300 Maintenance Manual (960-Q08)
  • Page 223 M_B_DM6 M_B_DQ55 M_B_DQ51 M_B_DQ50 M_B_DQ54 M_B_DQ56 M_B_DQ60 M_B_DQ57 M_B_DQ61 M_B_DM7 M_B_DQS#7 M_B_DQS7 M_B_DQ59 M_B_DQ63 M_B_DQ62 M_B_DQ59 DDRDAT_SMB DDRCLK_SMB CN23 HDMI Connectors PIN No. Signal name PIN No. Signal name HDMITX2P_ C HDMITX2N_ C HDMITX1P_ C Satellite A300 Maintenance Manual (960-Q08)
  • Page 224 HDMI HP CN24 ODD Connectors CONN DIP HOUSING 50P 2R FR(P0.8,H6.3) PIN No. Signal PIN No. Signal name name IDERST PDD8 PDD7 PDD9 PDD6 PDD10 PDD5 PDD11 PDD4 PDD12 PDD3 PDD13 PDD2 PDD14 PDD1 PDD15 Satellite A300 Maintenance Manual (960-Q08)
  • Page 225 Pin Assignment PDD0 PDDREQ PDIOR# PDIOW# PIORDY PDDACK# IRQ14 PDA1 DIAG# PDA0 PDA2 PDCS1# PDCS3# ODDLED# CN25 VGA Connectors Signal name Signal name PEG RXN15 PEG RN15 PEG RXP15 PEG TXP15 PEG RXN14 PEG TXN14 Satellite A300 Maintenance Manual (960-Q08)
  • Page 226 PEG RXP10 PEG TXP10 PEG RXN9 PEG TXN9 PEG RXP9 PEG TXP9 PEG RXN8 PEG TXN8 PEG RXP8 PEG TXP8 PEG RXN7 PEG TXN7 PEG RXP7 PEG TXP7 PEG RXN6 PEG TXN6 PEG RXP6 PEG TXP6 Satellite A300 Maintenance Manual (960-Q08)
  • Page 227 PEG RXN1 PEG TXN1 PEG RXP1 PEG TXP1 PEG RXN0 PEG TXN0 PEG RXP0 PEG TXP0 CLK MXM# EV CRT DDCCLK CLK MXM# EV CRT DDCDAT GFXRST# EV HDMI DDCCLK SYSFANON# EV HDMI DDCDAT GFXON Satellite A300 Maintenance Manual (960-Q08)
  • Page 228 EV LVDS LTX1 EV LVDS UTX1 EV LVDS LTX#0 EV LVDS UTX#0 EV LVDS LTX0 EV LVDS UTX0 EV LVDS LCLK# EV LVDS UCLK# EV LVDS LCLK EV LVDS UCLK EV TV C/R EV TV Y/G Satellite A300 Maintenance Manual (960-Q08)
  • Page 229 Pin Assignment EV TV COMP EV HDMICLK- EV HDMICLK+ EV HDMITX2N EV HDMITX2P EV HDMITX1N EV HDMITX1P EV HDMITX0N EV HDMITX0P VIN VGA VIN VGA Satellite A300 Maintenance Manual (960-Q08)
  • Page 230 LAN _ ACTLED# CN28 USB Board Connectors PIN No. Signal name PIN No. Signal name USBPWR0 BUSBP7_ BUSBP7+ CN29 2’nd SATA HDD Connectors PIN No. Signal name PIN No. Signal name SATA_TXP0 SATA_TXN0 SATA_RXN0 SATA_RXP0 Satellite A300 Maintenance Manual (960-Q08)
  • Page 231 Pin Assignment +3.3VSATA +3.3VSATA +3.3VSATA CN30 5 in 1 Card Reader Connectors Signal name Signal name XD_CD#C XD_R/B#_C XD_RE#_C XD_CE#C CD_CLE_C XD_ALE_C XD_WE# _C SD_D2_C XD_WPO# _C SD_D3_C VCC_XD SD/MS_CLK_C SD_CMD_C MS_D3/XD_D0_C MS_CD#_C Satellite A300 Maintenance Manual (960-Q08)
  • Page 232 MS_D0/ XD_D2_C MS_D3/XD_D0_C MS_D1/XD_D7_C SD_ MS_CLK_C MS_BS/XD_D3_C MS_D2/XD_D1_C SD_D0_C MS_D0/XD_D2_C SD_D1_C MS_BS/XD_D3_C XD_D4_C XD_D5_C XD_D6_C MS_D1/XD_D7_C VCC_XD SD_CD#C SM_WPI#/SD_WP_ CN31 SATA HDD Connectors PIN No. Signal name PIN No. Signal name SATA_TXP1 SATA_TXN1 SATA_RXN1 SATA_RXP1 Satellite A300 Maintenance Manual (960-Q08)
  • Page 233 Pin Assignment +3.3VSATA +3.3VSATA +3.3VSATA CN32 USB Board Connectors PIN No. Signal name PIN No. Signal name USBPWR0 BUSBP9_ BUSBP9+ CN33 Mini Card Connectors Signal name Signal name WAKE# BT_DATA Satellite A300 Maintenance Manual (960-Q08)
  • Page 234 Pin Assignment BT_CHCLK +1.5V ---- CLK_PCIE_ MINI3# CLK_PCIE_ MINI3 RF_EN_WLAN PLTRST# PCIE_RXN5 +3V_S5 PCIE_RXP5 +1.5V MINI3_SMCLK PCIE_TXN5 MINI3_SMDATA PCIE_TXP5 USBD- USBD+ C_LINK_CLK C_LINK_DAT +1.5V C_LINK_RST Satellite A300 Maintenance Manual (960-Q08)
  • Page 235 Pin Assignment CN34 1394 Port PIN No. Signal name PIN No. Signal name L1394_TPB0- L1394_TPB0+ L1394_TPA0- L1394_TPA0+ CN35 INT MIC Connectors PIN No. Signal name PIN No. Signal name INT_MIC_R ADOGND Satellite A300 Maintenance Manual (960-Q08)
  • Page 236 Appendix. D Appendix D Display Codes Display Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Keytop Note Make Break Make Break ‘ ~ 7 & BkSp Satellite A300 Maintenance Manual (960-Q08)
  • Page 237 Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Caps Lock ‘ “ Enter Shift (L) No.102 , < . > Shift (R) Satellite A300 Maintenance Manual (960-Q08)
  • Page 238 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Ctrl Alt (L) Space ALT (R) ← Home ↑ ↓ PgUp PgDn → Satellite A300 Maintenance Manual (960-Q08)
  • Page 239 5. * This key corresponds to key No. 42 in a 102-key model. 6. * Refer to Table D-6, No. 124 key scan code. 7. * Refer to Table D-7, No. 126 key scan code. Satellite A300 Maintenance Manual (960-Q08)
  • Page 240 Shift key, scan codes are changed as listed below: With left Shift With right Shift Set 1 E0 AA __________ E0 B6 E0 2A ___________ E0 36 Set 2 E0 F0 12 ________ E0 F0 59 E0 12 ___________ E0 59 Satellite A300 Maintenance Manual (960-Q08)
  • Page 241 E0 2A E0 5D E0 DD E0 AA E0 12 E0 2F E0 F0 2F E0 F0 12 Table D-4 Scan codes with Fn key Code set 1 Code set 2 Keytop Make Break Make Break CTRL LALT ARROW NUMERIC Scrl Satellite A300 Maintenance Manual (960-Q08)
  • Page 242 Code set 2 Keytop Make Break Make Break (–) Table D-6 No.124 key scan code Code set 1 Code set 2 Shift Make Break Make Break Prt Sc Common Ctrl + Shift + Alt + Satellite A300 Maintenance Manual (960-Q08)
  • Page 243 Display codes Table D-7 No.126 key scan code Shift Code set 1 Code set 2 Make Make Pause Common* E1 1D E1 F0 Ctrl* E0 46 7E E0 F0 *: This key generates only make codes. Satellite A300 Maintenance Manual (960-Q08)
  • Page 244 Appendix E Keyboard Layout United Status (US) Keyboard Figure US keyboard (L300mm x W131.3mm) Traditional Chinese (CH) Keyboard Figure CH keyboard (L300mm x W131.3mm)
  • Page 245 3. Thai (TI) Keyboard Figure TI keyboard (L300mm x W131.3mm) 4. Korean (KO) Keyboard Figure KO keyboard (L300mm x W131.3mm)
  • Page 246 5. United Kingdom (UK) Keyboard Figure UK keyboard (L300mm x W131.3mm) 6. US International (UI) Keyboard Figure UI keyboard (L300mm x W131.3mm)
  • Page 247 7. Hebrew (HB) Keyboard Figure HB keyboard (L300mm x W131.3mm) 8. Danish (DM) Keyboard Figure DM keyboard (L300mm x W131.3mm)
  • Page 248 9. Swiss (SW) Keyboard Figure SW keyboard (L300mm x W131.3mm) 10. Arabic (ARE) Keyboard Figure ARE keyboard (L300mm x W131.3mm)
  • Page 249 11. Czech (CZ) Keyboard Figure CZ keyboard (L300mm x W131.3mm) 12. Russian (RU) Keyboard Figure RU keyboard (L300mm x W131.3mm)
  • Page 250 13. Portuguese (PO) Keyboard Figure PO keyboard (L300mm x W131.3mm) 14. Slovakian (SL) Keyboard Figure SL keyboard (L300mm x W131.3mm)
  • Page 251 15. Italian (IT) Keyboard Figure IT keyboard (L300mm x W131.3mm) 16. French (FR) Keyboard Figure FR keyboard (L300mm x W131.3mm)
  • Page 252 17. German (GR) Keyboard Figure GR keyboard (L300mm x W131.3mm) 18. Greek (GK) Keyboard Figure GK keyboard (L300mm x W131.3mm)
  • Page 253 19. Canada French (CF) Keyboard Figure CF keyboard (L300mm x W131.3mm) 20. Hungarian (HG) Keyboard Figure HG keyboard (L300mm x W131.3mm)
  • Page 254 21. Spanish (SP) Keyboard Figure SP keyboard (L300mm x W131.3mm) 22. Turkish (TR) Keyboard Figure TR keyboard (L300mm x W131.3mm)
  • Page 255 3. Turkish F (TF-F) Keyboard Figure TF-F keyboard (L300mm x W131.3mm) 24. Swedish (SD) Keyboard Figure SD keyboard (L300mm x W131.3mm)
  • Page 256 25. Belgian (BE) Keyboard Figure BE keyboard (L300mm x W131.3mm) 26. Yugoslavian (YU) Keyboard Figure YU keyboard (L300mm x W131.3mm)
  • Page 257 27. Norwegian (NW) Keyboard Figure NW keyboard (L300mm x W131.3mm) 28. Scandinavian (ND) Keyboard Figure ND keyboard (L300mm x W131.3mm)
  • Page 258 29. Canadian Multinational (AC) Keyboard Figure AC keyboard (L300mm x W131.3mm) 30. Canadian Bilingual (CB) Keyboard Figure CB keyboard (L300mm x W131.3mm)
  • Page 259 31. Japanese (JP) Keyboard Figure JP keyboard (L300mm x W131.3mm)

  • Page 260: Wiring Diagrams

    VSYNC (14) (15) SDL (15) Figure F-1 RGB Monitor ID Wraparound connector (15PIN to 15PIN) LAN Loopback Connector (3) BIDBP (RX+) (1) BIBAP ‘(TX+) (4) BIDBN (RX-) (2) BIDAN (TX-) Figure F-2 LAN loopback connector Satellite A300 Maintenance Manual (960-Q08)
  • Page 261 3. If you fail to rewrite BIOS, then when you next turn on the power, a message may be displayed that the contents of the BIOS have been erased or system can not boot . In this case, insert the BIOS rewriting disk, and the BIOS will be rewritten. Satellite A300 Maintenance Manual (960-Q08)
  • Page 262 Appendix H Appendix H EC/KBC Rewrite Procedures Same as BIOS rewrite Procedures, please refer appendix G Satellite A300 Maintenance Manual (960-Q08)
  • Page 263 Appendix I Reliability Appendix I Reliability The following table shows MTBF (Mean Time Between Failures) in maximum configuration. Table I-1 MTBF Component Time (hours) System 6678.00 Satellite A300 Maintenance Manual (960-Q08)

This manual is also suitable for:

Satellite a300

Table of Contents