Bluetooth - Toshiba Tecra A3-S711 Maintenance Manual

4 Replacement Procedures

4.10 Bluetooth

Removing the Bluetooth
To remove a Bluetooth unit, follow the steps below.
1. Detach a FFC cable from motherboard.
2. Remove two black M2x3 screws.
3. Grasp the Bluetooth unit and remove it.
Installing the Bluetooth
To install a Bluetooth unit, follow the steps below and refer to the figures in the preceding section.
1. Seat the Bluetooth module securing with two black M2x3 screws.
2. Connect the FFC cable to motherboard.
4-26
Figure 4-19 Removing the Bluetooth
Tecra A3/S2 Series Maintenance Manual