Click on the browse button to open a new window and locate the downloaded
firmware file in your computer. Confirm your selection and click "APPLY" to
make changes take effect. The following message will appear:
Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based configuration interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
Note: Do not turn off or disconnect the
access point during a firmware upgrade, as
this could damage the device.
Note: It is recommended that you use a
wired Ethernet connection to upload the
firmware file.
75