Edimax BR-6258nL User Manual page 36

Host Name
MAC Address
IP Address
Subnet Mask
Default
Gateway
User Name
Password
PPTP Gateway
Connection ID
MTU
Click "APPLY" to make the changes take effect. The following message will
appear:
Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based configuration interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
Input the host name of your computer here. This is
optional and only required if your ISP asks you to do
so.
If your ISP only permits computers with certain MAC
addresses to access the Internet, input your
computer's MAC address here. Press "Clone Mac
address" to fill the MAC address field with your
computer's MAC address automatically.
Input the IP address assigned by your ISP here.
Input the subnet mask assigned by your ISP here.
Input the default gateway assigned by your ISP here.
Some ISPs may call this "Default Route".
Input the user name assigned by your ISP here.
Input the password assigned by your ISP here.
Input the PPTP gateway assigned by your ISP here.
Give this connection a name (optional).
Input the MTU value of your network connection here.
If you do not know, use the default value.
36