Edimax BR-6258nL User Manual page 46

DTIM Period
Data Rate
N Data Rate
Channel Width
Preamble Type
Broadcast ESSID Decide if the device will broadcast its own
CTS Protect
TX Power
radio. Please do not modify the default
value if you don't know what this does, the
default value is 100
Set the DTIM period of wireless radio.
Please do not modify default value if you
don't know what it is, the default value is 3
Set the wireless data transfer rate. Since
most wireless devices will negotiate with
each other and pick a proper data transfer
rate automatically, it's not necessary to
change this value unless you know what
will happen after modification.
Set the data rate of 802.11n clients,
available options are MCS 0 to MCS 15. It's
safe to set this option to "Auto" and it's not
necessary to change this value unless you
know what will happen after modification.
Select wireless channel width (bandwidth
used by wireless signals from the travel
router). It's suggested you select "Auto
20/40MHz". Do not change to "20 MHz"
unless you know what that does.
Set the wireless radio preamble type. Please
do not modify the default value if you
don't know what this does, the default
value is "Short Preamble".
ESSID. You can hide the ESSID of your travel
router (set the option to "Disable"), so only
people who know the ESSID of your travel
router can connect to it.
Enabling this setting will reduce the chance
of radio signal collisions between 802.11b
and 802.11g wireless access points. It's
recommended to set this option to "Auto".
You can set the output power of the
wireless radio. Unless you're using the travel
router in a very large space, you may not
require 100% output power. This will
enhance security (malicious/unknown
users in distant areas will not be able to
46