Edimax BR-6258nL User Manual page 64

Protocol
Port Range
Add
Reset
IP addresses which have been added to the permitted list will then be
displayed on the "Access Control" page. To delete one or more entries, please
check the box of the corresponding entry (labeled "Select"), and click "Delete
Selected". If you wish to delete all the entries, click "Delete All".
Click "APPLY" to make the changes take effect. The following message will
appear:
Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based configuration interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
Select the network protocol, "TCP", "UDP" or
"both".
Enter the port range. It can be a range such as
"1-100", specific ports such as "1,3,5,7,9" or a
single port number.
Click "Add" to add the IP address to the IP
address list.
Click "Reset" to remove everything in all fields.
64