Edimax BR-6258nL User Manual page 41

Enable Static DHCP
Leases
MAC Address
IP Address
Add
Clear
Check the box labeled "Enable Static DHCP Leases" to enable this function and
then input the required values. Assigned entries will be listed in the table
"Static DHCP Lease Table". Up to 16 static DHCP leases can be assigned this
way.
Click "APPLY" to make the changes take effect. The following message will
appear:
Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser-based configuration interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
Check this box to enable the function.
Input the specified computer's MAC address
here.
Assign a fixed IP address for the specified
computer here.
After you have entered the MAC address and
the IP address, click "Add" to add the
information to the "Static DHCP Leases
Table".
Click "Clear" to clear the MAC address and IP
address fields.
41