Basic Operation; Turning On The Gpsmap 96/96C - Garmin GPSMAP 96 Pilot's Manual

b
asIc

Turning On the GPSMAP 96/96C

The first time you power up your new GPSMAP
96/96C, the receiver must collect satellite data and
establish its present position. To ensure proper
initialization, the GPSMAP 96/96C is shipped from
the factory in AutoLocate mode, which allows the
receiver to "find itself" anywhere in the world. Before
you turn on the unit to start initialization, be sure
that it has a clear and unobstructed view of the sky to
receive satellite signals.
Warning and Information Page
96/96C Owner's Manual
o
peratIon
Press ENTER
to acknowledge
and show the
Satellite Page.
To turn On and Off the GPSMAP 96/96C:
1. Press and hold the Power key. When the unit
powers on, a tone sounds, and the first page
appears.
2 After a few seconds, a Warning/Information
Page appears. To acknowledge that you
have read and understand the warning, press
ENTER to continue.
3. To turn off the GPSMAP 96/96C, press and
hold the POWER key again.
WARNING: When you agree with the
statements on the Warning Page it is assumed
that you understand that the GPSMAP 96 and
GPSMAP 96C are intended as aids to navigation
only. That the navigation information and
obstacle data provided by the GPSMAP 96 and
GPSMAP 96C is intended as an aid to situational
awareness only. That it does not take precedence
over accepted practices for safe navigation using
Visual Flight Rules and that you have accepted
the responsibilities and risks associated with
using these devices.
B o >
aSIc peratIon