Sonar Alarms - Garmin GPSMAP 96 Pilot's Manual

Nav (Navigation) Alarms
Next Turn—sets an alarm to indicate next turn in
route. Select Off for no Next Turn alarm. Select Dist
to enter a specific distance. Select Time to enter a
specific time before the turn for the alarm to go off.
Select Auto for the unit to provide a Next Turn alarm
at its discretion.
Arrival—sets an alarm to sound when you are a
specified distance or time away from a destination
waypoint. Select Off for no Arrival alarm. Select Dist
to enter a specific distance. Select Time to enter a
specific time before the destination for the alarm to
go off. Select Auto for the unit to provide an Arrival
alarm at its discretion.
Off Course—sets an alarm to sound when you are
off course. Place a check mark in the box, then enter
a distance.
Anchor Drag—sets an alarm to sound when you
have exceeded a specified drift distance. Place a check
mark to turn this alarm on and then enter a distance.
96/96C Owner's Manual

Sonar Alarms

Shallow Water—sets alarms to sound when you enter
an area of water that is too shallow. Select On and
then enter a specific distance. You must be receiving
sonar NMEA data for this function to work.
Deep Water—sets alarms to sound when you enter
an area of water that is too deep. Select On and then
enter a specific distance. You must be receiving sonar
NMEA data for this function to work.
Speed Filter—sets the Time Between Readings to
Off, Auto, or User.
Sonar Alarms Page
M M >
aIn enu