Garmin GPSMAP 96 Pilot's Manual page 19

To select and start an on-screen button:
Use the ROCKER to highlight the on-screen
button, and press ENTER.
To enter data in a data field:
1. Use the ROCKER highlight the data field, and
press ENTER to start the field.
2. Press up or down on the ROCKER to select
characters. Press right to move to the next
character field or press left to move back to the
previous character field. If there are two lines
of data, keep pressing right to drop down to
the next line.
To clear the entire data field, move the cursor
to the left-most character field and press left
once more on the ROCKER.
3. After entering the data, press ENTER to
confirm the change.
96/96C Owner's Manual
4. To save the waypoint and exit the New
Waypoint Page, highlight OK, and press
ENTER.
Or
To cancel the waypoint and exit the New
Waypoint Page, highlight DELETE, and press
ENTER.
Not all fields are programmable, such as the date and
time. When you are on a page with fields that are not
selectable, the cursor skips over them.
B o >
aSIc peratIon