Garmin GPSMAP 96 Pilot's Manual page 136

a >
ppendIx
You must know your GRI chain number and
secondary stations to create a LORAN TD position.
For more information please read our LORAN TD
Position Format Handbook, available at the Garmin
Web site, at www.garmin.com/support/userManual.
html.
Interface formats are selected from the Interface Setup
on page 104 of this manual. The input/output lines
on your GPSMAP 96/96C are RS-232 compatible,
allowing easy interface to a wide range of external
devices, including PC's, differential beacon receivers,
marine autopilots and /or a second GPS receiver.
The NMEA 0183 version 3.01 interface format is
supported by the GPSMAP 96/96C and enables the
unit to drive up to three NMEA devices.

(-) Ground
Data In
(+) Power
Unit Connector View
NMEA 0183 Version 3.01 Approved Sen-
tences:
GPGGA, GPGLL, GPGSA, GPGSV, GPRMB,
GPRMC, GPRTE, GPVTG, GPWPL, GPBOD
Data Out
96/96C Owner's Manual