Basic Operation; Creating And Using Waypoints; Marking Your Current Location; Creating Waypoints Using The Map - Garmin Colorado Series Owner's Manual

B O
aSic PeratiOn
b
asic
The most common operations you can perform with
your Colorado consist of creating and using waypoints,
working with Where To?, and setting up and using
Profiles.

Creating and Using Waypoints

Waypoints are locations or landmarks you record and
store in the Colorado that you might want to return to
later. You can add waypoints at any time on the unit.
There are three ways to create waypoints: press the
Enter button while at a location, create a waypoint
on the Map page, or enter coordinates for a waypoint
manually.

Marking Your Current Location

Press and hold the Enter button to quickly mark your
current location and create a new waypoint. You must
have a valid position (2D or 3D) fix to mark your
current location.

o
PeraTion
To mark your current location:
1. Press and hold the Enter button on the Rock 'N'
Roller until the screen displays that the waypoint
was successfully saved. A default three-digit
name and symbol are assigned to the new
waypoint.
2. To view and edit the waypoint information,
highlight Yes and press Enter.
3. To return to the Map page, highlight No and
press Enter.

Creating Waypoints Using the Map

To create a waypoint using the Map page:
1. On the Map page, use the Rock 'N' Roller to
move the pointer to the map item you want to
mark.
2. Press in and quickly release the Rock 'n' Roller
to capture the pointer location and open the
information page for the map item.
3. Select Save. If there is no information for that
point, at the "No map information at this point.
Do you want to create a user waypoint here?"
prompt, select Yes.
Colorado Series Owner's Manual