Trip Tab - Garmin GPSMAP 392, 398, 492, 498 Owner's Manual

M M > T T
AIN ENU RIP AB
3. Select a Current Station from the list, and press ENTER. As
you move the highlight over each Current Station in the list,
the station is highlighted on the Map window. The distance
and bearing from your location to the highlighted station are
shown at the bottom of the list.
To select a Current Station from a map location:
1. Highlight the At field, and press ENTER to open the Find
Currents Page.
2. Highlight Map Position, and press ENTER to open the Find
Near Map Position Page.
3. Press up or down on the ROCKER to move the map pointer
to a map location, and press ENTER. The Find Near Map
Position Page shows a list of Current Stations near the
selected map location.
4. Select a Current Station, and press ENTER. If the "None
Found" message appears, repeat steps 1-3 until you find a
station.
Viewing a Current Report
Press the Show Report soft key to view a detailed report of all
times and values for all the minimum and maximum current flows
through the day including Flood, Slack, and Max Ebb times and
strengths.
44

Trip Tab

The Trip tab shows the Trip Odometer, Moving Average speed,
Total Average speed, Maximum Speed, Stopped Time, Moving
Time, Total Time, and Odometer. To reset the data, choose from
Reset Trip, Reset Max Speed, Reset Odometer, or Reset All, and
press ENTER.
GPSMAP 392/398/492/498 Owner's Manual