Trip Tab; Celestial Tab - Garmin GPSMAP 178 Owner's Manual

Reference
Main Menu: Trip Tab/

Celestial Tab

Main Menu— Trip Tab
Position
Skyview
Window
Sun
Position
Overhead (90°) 45°
20° Horizon (0°)
Main Menu— Celestial Tab

Trip Tab— displays Trip Odometer, Moving Average Speed, Total Average Speed, Maximum Speed,
Stopped Time, Moving Time, Total Time, and Odometer.
To reset the trip data:
1. Highlight 'Reset Trip', 'Reset Max Speed', 'Reset Odometer', or 'Reset All' and press ENTER.
Celes (Celestial) Tab— displays celestial data for sun and moon rise/set, moon phase, and approximate
skyview location of the sun and moon. The moon phase displays the current visible portion of the moon
as a light color. You may display this data for your current position, a position from the map, or a Find
item location. Also, you may select a different date and time, or use the current data.
To choose another position:
1. From the Celestial tab, highlight the 'At' field and press ENTER.
2. The Find menu appears. Make a selection and press ENTER until the information for that location is
displayed on the Celestial tab. See pages 65-67 for more information on using the Find feature. List
highlight any category, except Other Location, and press ENTER. If you wish to reference a Find item,
select from the Find list, and press ENTER.
The location the unit is using appears in the 'At' field. The timetables displayed is based upon your
Date/Time
current time zone. You may change your time zone to view times from another zone. Keep in mind this
changes the time settings for the entire unit. (see page 86).
Sun/Moon
To change the time or date:
Event Times
1. From the Celestial tab, use the ARROW KEYPAD to highlight the date or time field and press
ENTER.
Moon
Phase
2. Enter a new date or time and press ENTER.
3. To return to the current date and time, press MENU, use the ARROW KEYPAD to highlight 'Use
Current Date and Time' and press ENTER.
To change the skyview orientation:
1. From the Celestial tab, press MENU, then use the ARROW KEYPAD to highlight 'North Up' or 'Track
Up' and press ENTER.