Navigating To A Destination - Garmin GPSMAP 392, 398, 492, 498 Owner's Manual

B O > N
ASIC PERATION AVIGATING TO A
To change the waypoint symbol:
1. Highlight the waypoint symbol field to the left of the
waypoint name, and press ENTER.
2. Use the ROCKER to select a new symbol, and press
ENTER.
To change the Comment, Location, Coordinates,
Depth, or Water Temp:
1. Highlight a field, and press ENTER.
2. Use the ROCKER to edit or enter the data. To move to the
next character, press right on the ROCKER.
3. Press ENTER when finished.
To move the waypoint on the map:
1. From the Waypoint Edit Page, highlight Move Wpt, and
press ENTER. A MOVE label now appears under the map
pointer in addition to a distance, bearing, and coordinate
window. You can also use the RANGE Down and RANGE
Up keys to zoom the map. The map zoom range appears in
the lower-right corner.
2. Use the ROCKER to point to the new location, and press
ENTER.
3. To stop the move process, press QUIT.
12
D
ESTINATION

Navigating to a Destination

Using the Nav Key
The NAV key provides four ways to navigate to a destination:
Go To Point, Follow Route, Follow Track, and TracBack. When
you are actively navigating, the Map Page shows a straight line
from your current location to the destination. The Go To option is
the easiest method for selecting a destination. A Go To allows you
to select a destination point and quickly set a direct course from
your present location. If you have a point highlighted on a list or
the map, Go To <point name> appears in addition to Go To Point.
The Go To function is accessed from any list of points or
graphically from the Map Page.
GPSMAP 392/398/492/498 Owner's Manual