Trip Tab; Celestial Tab - Garmin GPSMAP 182 Owner's Manual

Reference
Main Menu: Trip/
Celes (Celestial) Tab
Skyview
Window
Moon Position
Overhead (90°) 70° 45° Horizon (0°)
You may also
change the sky-
view from 'North
Up' to 'Track Up'.
Celestial Tab Menu
58
Trip Tab— displays Trip Odometer, Moving Average speed, Total Average speed, Maximum Speed,
Stopped Time, Moving Time, Total Time, and Odometer. You may reset the data by choosing from
'Reset Trip', 'Reset Odometer', 'Reset Max Speed', or 'Reset All' and pressing ENTER/MARK.
Celes (Celestial) Tab— displays celestial data for sun and moon rise/set, moon phase, and approxi-
mate skyview location of the sun and moon. The moon phase will display the current visible portion of
the moon as a light color. You may display this data for your current position, a position from the map,
Position
or a Find item location. Also, you may select a different date and time, or use the current data.
Date/Time
To choose a position:
Sun/Moon
1. From the Celes tab, highlight the 'At' fi eld and press ENTER/MARK.
Event Times
2. From the Find list highlight any category, except Other Location, and press ENTER/MARK. If you
wish to reference a Find item, select from the Find list, and press ENTER/MARK.
Moon
Phase
3. Select an item from the desired list or tab lists and press ENTER/MARK. For a location from the
map, choose 'Other Location' and press ENTER/MARK, select a position on the map and press
Sun Position
ENTER/MARK.
4. From the Find item detail page, highlight 'OK' and press ENTER/MARK.
The location the unit is using will appear in the Date/Time/Position fi eld. The timetables displayed
will be based upon your current time zone. When using a position from another location outside of
your time zone, you will need to set the Time Zone for that location under the "Time" tab on the
Main Menu (see page 61).
To change the time or date:
1. From the Celes tab, use the ARROW KEYPAD to highlight the date or time and press
ENTER/MARK.
2. Enter a new date or time and press ENTER/MARK.
To use current date and time:
1. From the Celes tab, press MENU, then use the ARROW KEYPAD to highlight 'Use Current Date
and Time' and press ENTER/MARK.