Table of Contents
Advertisement
Manually Configuring Network Adapters
3. Next to "Configure" (2) [Designer: pls callout (2) in the screenshot above],
if "Manually" is selected, your Router will need to be set up for a static IP
connection type. Write the address information in the table below. You will
need to enter this information into the Router.
4. If not already set, at "Configure:", choose "Using DHCP Server". This will tell the
computer to obtain an IP address from the Router.
5. Close the window. If you made any changes, the following window will appear.
Click "Save".
Restart the computer. When the computer restarts, your network settings are now
configured for use with the Router.
Mac OS X
1. Click on the "System Preferences" icon.
53
53
1
2
3
4
5
6
7
8
9
10
11
Advertisement
Table of Contents
