Section 3: Map - Garmin GPSMAP 175 Owner's Manual

• Setup Page Display?— allows you to specify the number of fields
displayed in the data window section of the map page. A graphic
compass tape or CDI scale may also be displayed. The following options
are available:
• 2 Fields
• 2 Fields & CDI
• 4 Fields & Compass
• 6 Fields
• 6 Fields & CDI
To select a page display option:
1. Highlight the 'Setup Page Display?' option and press T.
2. Select the desired option and press T.
• Change Data Fields?— allows you to specify the data displayed in
each data field used on the map display. The following options are available:
• BRG- bearing to active wpt
• SOG- speed over ground
• ETE- estimated time enroute
• XTK- crosstrack error
• TRN- turn angle to wpt
To change a data field:
1. Highlight the 'Change Data Fields?' option and press T.
2. Move the field highlight to the desired field and press T.
3. Select a data field option and press T.
• Restore Defaults?— resets all map page options (except map
configuration options; see pages 33-34) to the factory settings.
• Setup Simulator?— allows you to define speed, course and position
values while in simulator mode. See the Getting Started Tour for more
on using simulator mode.
A. The map page can be
configured to display
a variety of
navigation data.
B. Each data field can
be set to display one
of ten data options.
MAP PAGE
Page Display & Data Fields
• 2 Fields& Compass
• 4 Fields
• 4 Fields & CDI
• 6 Fields & Compass
• 8 Fields
• DIS- distance to active wpt
• COG- course over ground
• ETA- estimated time of arrival
• VMG- velocity made good
• WPT- active wpt name
3
35