1. Manuals
  2. Brands
  3. Garmin Manuals
  4. GPS
  5. GPSMAP 175
  6. Owner's manual

Garmin GPSMAP 175 Owner's Manual

Garmin gpsmap 175 owner's manual and reference
Hide thumbs
Table of Contents

Advertisement

Quick Links

1
OWNER'S MANUAL AND REFERENCE
ZOOM
PAGE
GOTO
QUIT
MOB
MENU
EDIT
MARK
ENTER
TM
GPSMAP
175
®

Advertisement

Table of Contents
loading

Related Manuals for Garmin GPSMAP 175

Summary of Contents for Garmin GPSMAP 175

  • Page 1 OWNER’S MANUAL AND REFERENCE ZOOM PAGE GOTO QUIT MENU EDIT MARK ENTER GPSMAP ®...
  • Page 2 All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or manual, including photocopying and recording, for any purpose without the express written permission of GARMIN. GARMIN, GPSMAP, G-chart, AutoLocate, TracBack, and PhaseTrac12 are registered trademarks of GARMIN Corporation and may only be used with permission.

  • Page 3: Capabilities/Packing List

    • Quick Reference Card Congratulations on choosing one of the most advanced marine navigation systems available! The GARMIN GPSMAP 175 uses the proven performance and simple operation of GARMIN GPS in combination with powerful G-Chart electronic charting for detailed cartography and plotting that will help guide...

  • Page 4: Warning And Caution

    GARMIN GPSMAP 175 is a precision electronic NAVigation AID (NAVAID), any NAVAID can be misused or misinterpreted and, therefore, become unsafe. Use the GPSMAP 175 at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this Owner’ s Manual—and thoroughly practice operation using the simulator mode prior to actual use.

  • Page 5: Table Of Contents

    Capabilities/Packing List ...i Warning and Caution...ii Table of Contents/Appendices ...1-2 Unit Features...3 Keypad Usage ...4 Initializing the Receiver/Getting Started ...5-22 Section 1: GPSMAP Status Page...23-25 Satellite status page description, receiver status, and initialization options Section 2: Position Page ...26-27 Position page description and uses Section 3: Map Page...28-35 Map page description, modes, scales, and options Section 4: Navigation Page ...36-38...
  • Page 6 APPENDICES Appendix A: GPSMAP 175 Installation ......73-75 Appendix B: Wiring & Specifications ......76-79 Appendix C: Messages .

  • Page 7: Unit Features

    GPSMAP 175 Unit Features Operating Keypad Battery Pack (in back) GETTING STARTED ZOOM PAGE GOTO QUIT MENU EDIT MARK ENTER Internal GPS Antenna Three-level gray LCD display...

  • Page 8: Keypad Usage

    The GPSMAP 175’ s advanced keypad system is designed to allow for fast, convenient selection of navigation options and data entry. The Getting Started Tour will introduce you to most of the keypad and provide a “hands-on” lesson in using the GPSMAP 175. We strongly encourage you to take the Getting Started tour before using your unit for actual navigation.

  • Page 9: Initializing The Receiver/Getting Started

    Acquiring Satellite Signals Acquiring Satellite Signals Because the GPSMAP 175 relies on satellite signals to provide you with navigation guidance, the receiver needs to have an unobstructed, clear view of the sky for best performance. What exactly does this mean? In a nutshell, the GPS receiver’...
  • Page 10 To use this almanac data, your GPSMAP 175 needs to know where you are, or be given the opportunity to “find itself.” Once you initialize the unit to this position, the GPSMAP 175 will usually compute a fix within a few minutes.
  • Page 11 The first time you power up your new GPSMAP 175 is an important step in getting the best possible GPS performance. The receiver must be given an opportunity to collect satellite data and establish its present position. To ensure proper initialization, the GPSMAP 175 is shipped from the factory in AutoLocate mode, which will allow the receiver to ‘find itself’...
  • Page 12 2. Press T to confirm your selection. The GPSMAP 175 will now begin searching for the appropriate satellites for your present position and should acquire a fix within a minute or so.
  • Page 13 ARROW KEYPAD. Press EDIT/ENTER to confirm changes. B. Whenever the screen backlighting is on, a bulb icon will appear in the status bar at the bottom of every GPSMAP 175 page. GETTING STARTED...
  • Page 14 Each page of the GPSMAP 175’ s system also features an options page, which gives you access to other functions and features that relate to the specific page you are viewing.
  • Page 15 Page Sequence/Position Page The satellite status page is one of four main pages used in the GPSMAP 175’ s system. All four pages are linked together in a simple chain, which allows you to scroll through the pages in either direction using the J and Q keys. To continue the tour, let’...

  • Page 16: Marking A Position

    Both of these techniques are described in the reference section of the manual and/or on your GPSMAP 175 Quick Reference Guide. To continue our tour, let’ s move on to the map page.
  • Page 17 The GPSMAP 175’ s map page combines digital chartplotting with a user- selectable display of navigation data and a built-in worldwide database to 64 nautical miles (nm). It will also be the page you use most to create and edit waypoints and routes.
  • Page 18 Now that you have a feel for how the cursor works, let’ s move on and see how the GPSMAP 175 works on the water. To help you practice using the map page and other features, we’ve stored a practice route in the receiver’ s permanent memory, so you can see exactly what you’ll experience when...
  • Page 19 This will also give us an idea of how the O key is used throughout the GPSMAP 175 system to provide options automatically oriented toward the function currently in use. Let’ s give it a try by activating the practice route stored in memory for navigation: 1.
  • Page 20 Simulator Setup/Map Scales A data field at the top of the page will now display the bearing and distance to the second route waypoint. To continue, let’ s enter a speed for our vessel, which we can do from the ‘Setup Simulator?’ listing on the options page. The setup simulator page is also available from any other page in the main page sequence.
  • Page 21 Reviewing & Creating Waypoints on the Map Once the cursor is over the TOUR3 waypoint, you’ll notice that the waypoint symbol and name will become highlighted, and the data field at the top of the page will display the waypoint name, the range and bearing from your present position, and the coordinates for the waypoint.
  • Page 22 Now that we’re navigating to an actual destination, let’ s move on to the next page of the GPSMAP 175 system, the navigation page: 1. Press the J key. Compass Tape Graphic Highway Pointer to Waypoint The navigation page provides graphic steering guidance to your destination.
  • Page 23 Using the Navigation Page Whenever the GPSMAP 175 is in simulator mode, you can adjust your speed and course from the navigation page using the R keypad. As you head toward each waypoint in the tour route, try adjusting your boat speed and course to get a feel for how the highway works.
  • Page 24 Active Route/Main Menu Page Now that you’ve seen the four main pages, let’ s review the active route page, which will appear in the main page sequence whenever you are navigating a route: To access the active route page: 1. Press the J key. The active route page shows each waypoint of the active route in sequence, with the waypoint name, distance and estimated time enroute to each waypoint displayed.
  • Page 25 As you’ve seen, the GPSMAP 175’ s main pages provide vital status, position, navigation and map information. The last page we’ll cover in the tour is the main menu page, which provides access to the GPSMAP 175’ s waypoint, route and planning functions, as well as various operational and navigation setup features.

  • Page 26: Power Off

    1. Press and hold the P key for about 3 seconds, until the screen is blank. Please read on and explore the Reference section— which contains a closer look at all of the exciting features of the GPSMAP 175— or use the Reference section as you need it. The GPSMAP 175 is one product you’ll grow with as you learn more about it.

  • Page 27: Section 1: Gpsmap Status Page

    Dilution of Precision Battery Gauge Status Bar The GPSMAP 175 status page provides a visual reference of various receiver functions, including current satellite coverage, receiver operating mode, battery strength and current receiver accuracy. The status information will give you an idea of what the receiver is doing at any given moment.
  • Page 28 Receiver status is indicated at the top of the page, with the current estimated position error (EPE), dilution of precision (DOP), and battery level to the left of the sky view. DOP measures satellite geometry quality on a scale of one to ten (the lower the number the better). EPE uses DOP and other factors to calculate a horizontal position error in feet or meters.
  • Page 29 The GPSMAP 175’ s status page features a context-sensitive options page that provides access to functions and features relating to the status page. To display the status page options: 1. Press O. To select a menu option: 1. Highlight the desired option and press T.

  • Page 30: Section 2: Position Page

    Time of Day The GPSMAP 175 position page shows you where you are, what direction you are heading and how fast you are going. The top of the page features a graphic compass tape to indicate your cardinal heading (while you’re moving), and four user-selectable data fields: course over ground (COG), speed over ground (SOG), distance traveled (TRP) and altitude (ALT).
  • Page 31 The GPSMAP 175’ s position page features a context-sensitive options page that provides access to functions and features relating to the position page. To display the position page options: 1. Press O. To select a menu option: 1. Highlight the desired option and press T.

  • Page 32: Section 3: Map Page

    Boat Icon Status The GPSMAP 175’ s map page provides a comprehensive display of electronic cartography, plotting and navigational data. The map display shows your boat on a digital chart, complete with geographic names, navaids, depth contours and a host of other chart features. It also plots your track and displays any routes and waypoints you create.

  • Page 33: Map Modes

    Your GPSMAP 175 will always power up in the position mode, with your vessel centered on the map display. • Whenever sufficient map coverage is not available to keep the boat centered, the boat icon will move toward the edge of the display.

  • Page 34: Using The Cursor

    The cursor allows you to pan away from your present position and scroll to other map areas around the world (even outside of your current G-chart coverage). As you pan past the edge of the current map display, the screen will actively scroll forward to provide continuous map coverage.

  • Page 35: Selecting Map Scales

    1. Press up on the zoom in. The GPSMAP 175’ s system has a built-in worldwide database to 64 n.m.(see Appendix F for a built-in coverage map), with more detailed coverage available through the use of G-chart data cartridges (see Section 10 for installing and using G-chart cartridges).
  • Page 36 The GPSMAP 175 map page is designed to be a flexible tool that can be custom-tailored to your exact navigation needs. The map options page provides access to many of the features and functions that will help you configure the map page to your own preferences.

  • Page 37: Map Configuration

    • Configure the Map?— allows you to determine what chart features are displayed on a particular map scale to prevent excessive clutter. The map configuration page features an on/off grid with a list of chart features down the left side. The zoom scales are displayed across the top of the grid with the chart scale currently in use also indicated.
  • Page 38 Map Configuration & Map Colors The map configuration options page also features a map calibration function that allows you to calibrate the map display with your exact physical surroundings or correct data from older charts. Before using the map calibration function, check to make sure that your map datum selected on the GPS matches the datum on the chart you are using (see page 84-88).

  • Page 39: Section 3: Map

    Page Display & Data Fields • Setup Page Display?— allows you to specify the number of fields displayed in the data window section of the map page. A graphic compass tape or CDI scale may also be displayed. The following options are available: •...

  • Page 40: Section 4: Navigation Page

    Waypoint Whenever a GOTO, MOB, TracBack or route has been activated, the GPSMAP 175 will provide digital and graphic steering guidance to the destination with the navigation page. The top half of the nav page features four user-selectable data fields that display the bearing (BRG) and distance (DIS) to waypoint, along with your current course (COG) and speed over ground (SOG).
  • Page 41 1. Press the up or down arrow of the 2. Press T to confirm. Navigation Page Options The GPSMAP 175’ s navigation options page allows you to define the nav data fields and select what waypoints are displayed on screen. To display the navigation page options: 1.

  • Page 42: Section 4: Navigation

    The following options are available for the navigation page: • Change Data Fields?— allows you to define the data displayed in any of the six user-selectable data fields. Ten data options are available: • BRG– bearing to active wpt • SOG– speed over ground •...

  • Page 43: Section 5: Main Menu Page

    The GPSMAP 175’ s main menu page provides access to various waypoint, system, navigation and interface management and setup menus. The main menu page is available from any page in the GPSMAP 175’ s system, and is accessed through the O key.

  • Page 44: Section 6: Waypoints

    Mark Key The GARMIN GPSMAP 175’ s M key lets you quickly capture your present position— or cursor or navaid position— in order to create a new waypoint. You must have a valid position fix to mark your present position.
  • Page 45 The mark key may also be used on the map page to mark the cursor position or an on-screen navaid. To mark a navaid, select the desired navaid with the cursor. The GPSMAP 175 will use the navaid text shown on the cartography as the default comment.
  • Page 46 Creating Waypoints On Map & By Text Waypoints may also be quickly created from the map display, which allows you to “point and shoot” at any map position to create a new waypoint. To create a new waypoint on the map: 1.
  • Page 47 A new waypoint may also be created without knowing position coordinates by entering its range and bearing from an existing waypoint or your present position. The GPSMAP 175 will then calculate the position coordinates for you, using the reference selected.
  • Page 48 Reviewing & Editing Waypoints Once you have created and stored a waypoint, it may be modified, reviewed, renamed or deleted at any time through the waypoint definition page. The waypoint definition page is available for any stored waypoint by highlighting the desired waypoint from the map display or selecting it from any waypoint list and pressing the T key.

  • Page 49: Waypoint Definition Page Options

    Waypoint Definition Page Options The waypoint definition page also features an options page that allows you to edit the selected waypoint on the map display, rename the selected waypoint or delete the waypoint from memory. To display the waypoint definition page options: 1.
  • Page 50 Waypoint Submenus & Nearest Waypoints The GPSMAP 175’ s main menu page features four waypoint submenus that let you manage a large number of waypoints quickly and efficiently. The submenus also provide a continuously updated nearest waypoints list and a proximity waypoint alarm function that can be used to define an alarm circle around submerged hazards, shallow waters, etc.

  • Page 51: Proximity Waypoints

    The proximity waypoints list lets you define an alarm circle around a stored waypoint position, and can be used to help you avoid reefs, rocks or restricted waters. Up to nine waypoints may be listed, with a maximum alarm radius of 99.9 nautical or statute miles or kilometers. If a proximity alarm circle overlaps with an existing alarm circle, a ‘Proximity Overlap’...

  • Page 52: Section 6: Waypoints

    Create Waypoint and Waypoint List The third waypoint submenu available from the main menu page is the ‘Create Waypoint’ submenu, which allows you to create a new waypoint by manually entering coordinates. Instructions for using the create waypoint submenu are provided on page 42. Waypoint List The last waypoint category available from the main menu is the waypoints list, which displays a master list of all waypoints currently stored in memory.

  • Page 53: Creating, Using, And Editing Waypoints Section 7: Goto/Mob/Tracback Functions

    If you are selecting a navaid or a new position as the GOTO destination, the GPSMAP 175 will automatically create or move a waypoint named ‘MAP’ at the navaid or map position.

  • Page 54: Goto Options

    The GOTO options page provides a list of additional GOTO options that let you start a TracBack route, select a destination waypoint from the nearest waypoints list, select a route to navigate, or cancel the current GOTO destination. To display the GOTO options: 1.

  • Page 55: Tracback Navigation

    MOB & TracBack Navigation The GPSMAP 175’ s man overboard (MOB) function lets you simultaneously mark and set a course to a position for quick response to emergency situations. To activate the MOB function: 1. Press the B key. 2. Press the T key to confirm and begin navigating to the MOB position.
  • Page 56 1. Press the G key, followed by the O key. 2. Highlight the ‘Start TracBack?’ option and press T. Once a TracBack has been activated, the GPSMAP 175 will take the track log currently stored in memory and divide it into segments called “legs”. Up to 30 temporary waypoints (e.g.

  • Page 57: Section 8: Routes

    The last way to navigate to a destination is to create a user-defined route. The GARMIN GPSMAP 175 lets you create and store up to 20 reversible routes (numbered 1-20), with up to 30 waypoints each. Routes can be created and modified right from the map page, allowing you to see each route graphically on-screen as you create, review, modify or navigate the route.
  • Page 58 Reviewing & Editing Routes On Map Once a route has been created on the map (and the Q key has been pressed to finish), the map display will automatically enter the route review mode. The arrow pointer will be replaced by the map cursor, located at the last route waypoint.

  • Page 59: Route Edit Mode

    The GPSMAP 175’ s route edit mode also allows you to insert a new route waypoint in any route leg using the map cursor. To insert a new waypoint between two existing route waypoints: 1. Use the cursor to select the leg in which to insert the new waypoint (the route line will change to a dotted line when the leg is selected) and press 2.
  • Page 60 Editing Routes & Route Editing Options To insert a new waypoint before the selected route waypoint: 1. Highlight the ‘Insert?’ option and press T. 2. Enter the name of the new waypoint using the R keypad, or press O to select the new waypoint from the nearest list, waypoint list, or map display.
  • Page 61 The GPSMAP 175’ s route list page displays all the routes currently stored in memory in numerical order, with the route number and comment displayed. Route 00 is always reserved for the TracBack route, while routes 1- 20 serve as storage routes. (Route 20 is stored as the GPSMAP tour route, which may be deleted at any time.) From the list, you may enter your own 16-...
  • Page 62 • Clear Route?— allows you to clear all waypoints from the selected route. To clear the selected route: 1. Highlight the ‘Clear Route?’ option and press T. 2. Press T to confirm the clear route warning. • Copy Route?— allows you to copy the waypoints of a selected route to another route.
  • Page 63 Whenever you have activated a route in the GPSMAP 175 system, the active route page will appear in the main page sequence. The active route page shows each waypoint of the active route, with the waypoint name, desired track, cumulative distance and ETE or ETA for each waypoint from your present position.

  • Page 64: Section 8: Routes

    The following options are available from the active route page: • Invert Route?— activates the active route in reverse order and begins navigation. • Activate Route?— reactivates the active route and selects the route leg closest to your current position as the new active leg. •...

  • Page 65: Section 9: Setup Menus

    The GPSMAP 175’ s main menu page’ s track submenu lets you specify whether or not to record a track plot (an electronic recording of your path) and define how it is recorded. It also provides an indicator of the track memory used and selects functions to clear the track memory and start a TracBack route.

  • Page 66: Setup Menus

    The GPSMAP 175’ s trip and fuel planning submenu lets you plan and review distance, fuel, and ETE/ETA information between any two waypoints; your present position and a stored waypoint; or any part of a stored route. Sunrise and sunset information is also provided. Two planning modes are available: point-to-point and route planning.
  • Page 67 The route planning mode lets you calculate the same planning information for any route stored in memory, in leg or cumulative leg or route totals. To use the route planning mode: 1. Highlight the ‘Trip & Fuel Planning’ option from the main menu and press T. 2.
  • Page 68 • Operational Mode lets you select between normal operation and simulator mode. The GPSMAP 175’ s system only pretends to track satellites in simulator mode, and should not be used for actual navigation.
  • Page 69 System Setup and System Setup Options • Local/UTC lets you choose to display the date and time in UTC (Greenwich Mean Time) time or local time offset from UTC time. The default setting is local with a ‘0’ offset. (If you are boating in the United States, be sure to enter a negative time indicator in front of the appropriate time offset for your location.) •...

  • Page 70: Navigation Setup

    1. Highlight the ‘Heading’ field and press T. Select the ‘User Mag Var’ option and press T. 2. Press T to access the variation field, and use the R keypad to enter the desired variation. Press T to confirm. A. The GPSMAP 175 will also display position coordinates in eight grid formats.
  • Page 71 GPSMAP 175’ s system. For a list of the available GPSMAP datums, see Appendix F. The default setting is WGS 84. • Velocity Filter allows you to select the GPSMAP 175’ s response time to changes in track or ground speed. Three settings are available: automatic, on, or off.
  • Page 72 The timer & alarms submenu is used to control various alarm/timer settings. • Timer sounds an alarm when a (count down) time interval (up to 99:59:59) has expired, or provides an elapsed (count up) timer up to 99:59:59. To use the timers: 1.
  • Page 73 Transfer Mode field. The ‘slave’ setting lets you control all data transfer from the “external” GPS receiver, or PC while the other settings request or send specific data from the primary unit.

  • Page 74: Section 9: Setup Menus

    If you are using an NMEA interface format, the NMEA format must be specified in the NMEA format field that will automatically appear when an NMEA option is selected. The appropriate baud rate will be set automatically. To select a NMEA format: 1.

  • Page 75: System And Navigation Setup; Timers, Alarms, And Track Log Section 10: Using G-Chart Cartridges

    2. Insert the card into the slot. (Label should face up and toward the unit.) 3. Use your thumb to firmly push the cartridge into place (until the cartridge will not go any further into the unit). If your GPSMAP 175 is on, a confirmation tone will sound when the cartridge has been properly installed and accepted.
  • Page 76 See page 31 for more information on Overzoom and No Map modes. When a G-chart cartridge is installed, the GPSMAP 175’ s system will automatically use the best available chart for display. As you enter and exit various subcharts, the system will automatically display the appropriate chart for the area you are in.
  • Page 77 Your unit uses 6 AA batteries that provide up to 10 hours of battery life. An optional rechargeable Ni-Cad battery pack and charger are also available. In addition, the GPSMAP 175 may be hard-wired to 5-40 volt DC power using the power/data cable or cigarette lighter adapter.
  • Page 78 The GPSMAP 175 displays battery strength in two ways: The first is a battery gauge located below the DOP measurement on the status page. The second is a battery icon located on the status bar. Both methods display continuous battery level updates and are shown only when the unit is being powered by battery power (not external power).
  • Page 79 2. Plug the other end into an electrical outlet. Do not charge your GPSMAP 175 for more than 24 hours with the battery charger system. Heat generated by overcharging can shorten battery life and cause battery pack component failures.

  • Page 80: Wiring & Specifications

    If the battery pack still does not retain a charge, it will be necessary to purchase a new battery pack. There is no hazard associated with powering up your GPSMAP 175 and charging the battery pack at the same time. DC Wiring The GPSMAP 175 may be hard-wired to your boat’...
  • Page 81 GPSMAP system. Other receivers with the correct RTCM format may be used, but may not correctly display status or allow tuning control from the GPSMAP 175 unit. mount antenna is designed to be used with several different GARMIN GPS units.

  • Page 82: Using The Mounting Bracket

    Using the Mounting Bracket The GPSMAP 175 can be used as either a handheld or fixed-mount receiver. An optional mounting bracket (part no. 010-00120-00) is available for swivel-mount installation on a pedestal or surface-mount installation on a vertical surface (i.e., boat bulkhead).
  • Page 83 (Search the sky) WARNING! The temperature range for the GPSMAP 175 is -4 to +158ºF (-20 to 70ºC). Extended exposure to temperatures exceeding this range (in storage or operating conditions) may cause failure of the LCD screen. This type of failure and related consequences is warranty.

  • Page 84: Messages

    Memory Battery Power is Low—The internal battery that stores waypoints, routes and track plots needs to be replaced. Take your unit to an authorized GARMIN service center for installation of a new battery. Need Altitude—Your GPSMAP system needs the altitude to maintain a position fix due to poor satellite coverage.
  • Page 85 RTCM Input has Failed—DGPS data being received has been lost. You are no longer receiving the beacon signal. Searching the Sky—The GPSMAP 175 is searching the sky for almanac data. Stored Data was Lost—All waypoints, routes and almanac data has been lost due to internal battery failure.

  • Page 86: Definitions

    The GPSMAP 175 uses an on-screen message prompt to alert you to important information. Whenever a message appears, press the J key to view the message. Almanac Data—The satellite constellation information (including location and health of satellites) that is transmitted to your receiver from every GPS satellite. Almanac data must be acquired before GPS navigation can begin.

  • Page 87: Time Offsets

    Turn (TRN)— The difference and direction in degrees between the bearing to your destination and your course over ground. The TRN value is used to indicate what direction, and how many degrees, to turn to get back on course. Universal Time Coordinated (UTC)— The time of day at the prime meridian (0º longitude) in Greenwich, England.

  • Page 88: Map Datums

    The GPSMAP 175’ s built-in worldwide database includes chart coverage down to 64 nm (120 km) for the areas outlined above. Note that the GPSMAP 175’ s database is only valid to 68º24.543 north or south. Adindan Afgooye AIN EL ABD ‘70 Anna 1 Ast ‘65...
  • Page 89 Astr Stn ‘52 Astrln Geod ‘66 Astrln Geod ‘84 Austria Bellevue (IGN) Bermuda 1757 BogataObserv Campo Inchspe Canton Ast ‘66 Cape Cape Canavrl Carthage CH-1903 Chatham 1971 Chua Astro Corrego Alegr Djakarta Dos 1968 Easter Isld 67 European 1750 European 1979 Finland Hayfrd Gandajika Base Geod Datm ‘49...
  • Page 90 Hong Kong ‘63 Hu-Tzu-Shan Indian Bngldsh Indian Thailand Indonesia ‘74 Ireland 1965 ISTS 073 Astro Johnston Island Kandawala Kerguelen Islnd Kertau 1948 L. C. 5 Astro Liberia 1964 Luzon Mindanao Luzon Philippine Mahe 1971 Marco Astro Massawa Merchich Midway Ast ‘61 Minna NAD27 Alaska NAD27 Bahamas...
  • Page 91 NAD27 Central NAD27 CONUS NAD27 Cuba NAD27 Greenland NAD27 Mexico NAD27 San Salvadr North American 1927- San Salvador Island NAD83 Nahrwn Masirah llndNahrwn- Masirah Island (Oman) Nahrwn Saudi Arbia Nahrwn- Saudi Arabia Nahrwn United Arab Nahrwn- United Arab Emirates Naparima BWI Obsrvtorio ‘66 Old Egyptian Old Hawaiian...

  • Page 92: Map Datums

    Qornoq Reunion Rome 1940 RT 90 Santo (Dos) Sao Braz Sapper Hill ‘43 Schwarzeck South American ‘69 S. American ‘69- Argentina, Bolivia, Brazil, Chile, South Asia Southeast Base Southwest Base Timbalai 1948 Tokyo Tristan Astro ‘68 Viti Levu 1916 Wake-Eniwetok WGS 72 WGS 84 Zanderij...

  • Page 93: Index

    Alarm Setup Anchor Drag Alarm Antenna Installation Appendices Arrival Alarm AutoLocate Backlight Level Batteries Beacon Receiver Setup Bearing Bearing/Distance Calculation Boat Icon Built-in Map Coverage Calibrations, Map Cancelling Active GOTOs Capabilities Cautions Clock Alarm Configurations, Map Contrast Setting Countdown Timer Course Deviation Indicator (CDI) 19 Crosstrack Error Cursor Mode...
  • Page 94 Keypad Tone Keypad Usage Local Time Offset Magnetic Variation Main Menu Man Overboard Function Map Calibration Map Configuration Map Datum List Map Datum Selection Map Page Map Scales Marking a Position Maximizing Map Measuring Bearing & Distance Menu Selection Message Descriptions Message Types Messages, Viewing Mounting Bracket...

  • Page 95: Index

    Satellite Acquisition Satellite Sky View Signal Strength Bars Simulator Mode Simulator Tour Specifications Status Bar Status Page Steering Guidance Sunrise/Sunset Calculation Swivel Mount Table of Contents Time Offsets Timer/Alarm Setup Tone Selection TracBack Function Track Log Track Memory Track Plot Resolution Track Recording Trip Odometer Turn (TRN)
  • Page 96 NOTES...
  • Page 97 NOTES...
  • Page 98 NOTES...

  • Page 99: Limited Warranty

    LIMITED WARRANTY GARMIN warrants this product to be free from defects in materials and workmanship for one year from the date of purchase. GARMIN International, Inc. will at its sole option, repair or replace any components which fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor.
  • Page 100 ® © 1996 GARMIN Corporation 1200 E. 151st Street Olathe, Kansas 66062 913/397.8200 FAX 913/397.8282 GARMIN (Europe) LTD Unit 5, The Quadrangle Abbey Park Industrial Estate, Romsey U.K. SO51 9AQ 44/1794.519944 FAX 44/1794.519222 Part Number 190-00096-00 Rev. A...

Table of Contents