Proximity Waypoints - Garmin GPS GPS 60 Owner's Manual

Proximity Waypoints

The Proximity Waypoints Page allows you to designate waypoints
that have alarm circles around them at specified distances. The alarm
helps you avoid locations that are restricted or dangerous.
To create a proximity waypoint:
1. Press PAGE until you see the Main Menu Page. Highlight 'Proximity'
and press .
ENTER
2. Press to display the Find Menu. (See p. 22 for instructions on
ENTER
using the Find Feature.)
3. Select a waypoint from the Waypoints List and press
display the Waypoint Information Page.
4. Highlight 'Use' at the bottom of the page and press
the point in the list on the Proximity Waypoints Page.
5. Use the key to highlight the Radius field if you want to
ROCKER
enter a value other than the default of 1 mile.
6. Highlight 'Proximity Alarms' and press
feature. When you trigger an alarm, a tone sounds and a 'Near
Proximity Point' message appears. When you move outside the set
radius, a 'Leaving Proximity Point' message appears.
7. To remove or review a single entry, press
waypoints from the list, press
ENTER
ENTER
ENTER to activate the alarm
ENTER . To remove all
and select 'Remove All.'
MENU
to
Highlight
point and press
ENTER to view
to place
Proximity Waypoints Page
GPS Navigation
GPS Navigation
Waypoints
Radius
field
21