Status Bar, Backlighting, And Contrast - Garmin GPS GPS 60 Owner's Manual

Getting Started
Status Bar, Backlighting,
and Contrast
Status Bar
The Status Bar appears at the top of the each Main Page and
contains icons that represent GPS 60 functions (see below).
Using Battery Power
Using Auxiliary Power
Acquiring Satellites
2-Dimensional Navigation
3-Dimensional Navigation
Backlight is On
Alarm is Set
Connected with USB
6
Status Bar
At the top of each Main Page is a status bar, which provides informa-
tion about several GPS 60 features. A table of status bar icons and defini-
tions appears to the left.
Backlighting and Contrast
The backlight comes on so you can see the screen clearly. To turn on
the backlight, press and release the POWER key. Thereafter, each time
you press a key, the backlight turns on automatically. Keep in mind that
excessive use of backlighting can significantly drain your battery power.
You can increase the screen contrast to compensate for low backlight
levels if you wish. See p. 41 for information on changing the backlight
timeout setting.
To adjust backlighting and contrast:
1. From any page, press and release the
2. Press the key up or down to increase or decrease screen
ROCKER
brightness.
3. Press the ROCKER key left or right to change screen contrast. Press
to exit.
QUIT
Screen Contrast
Screen Brightness
key.
POWER
Slider
Slider